Toshiba TLP-MT3 Manual del usuario - Página 17

Navegue en línea o descargue pdf Manual del usuario para Proyector Toshiba TLP-MT3. Toshiba TLP-MT3 43 páginas. Lcd projector
También para Toshiba TLP-MT3: Especificaciones (2 páginas)

Imprimir página
Toshiba TLP-MT3 Manual del usuario
Connections and installation
(Continued)
1
Place the projector on a steady,
level surface such as a table.
Point the projector squarely at the screen
for the best possible picture.
Top view
Screen
90
Point the lens straight at the center of the
screen as above.
Side view
Screen
90
Place the projector horizontally so that the
projecting light hits the screen squarely.
2
Adjust the distance between
the lens and the screen.
The projection size depends on the
distance between the lens and the
screen.
Adjust the projection size by changing the
distances as shown below.
Screen
90
b
a
a: Distance between the lens and the screen
b: Distance between the lens height and the
bottom of projection area
a (m)
Screen size
Minimum
(inches)
(WIDE)
23
–
40
1.56
60
2.373
80
3.186
100
3.999
150
6.031
200
8.064
250
10.096
• The values are approximations.
3

Connect the power cord.

• Insert one end in the AC IN socket on
the projector.
• Insert the other end in a wall outlet.
Lens
To a wall outlet.
The ON indicator lights in orange and the
projector turns to standby mode.
4
Take off the lens cover.
Maximum
(TELE)
b (cm)
1.132
4
2.017
6
3.059
9
4.1
12
5.142
15
7.746
23
10.35
30
–
38
17
(Continued)