Toshiba TLP510E Manual de formación técnica - Página 6

Navegue en línea o descargue pdf Manual de formación técnica para Proyector Toshiba TLP510E. Toshiba TLP510E 47 páginas. 3lcd data projector
También para Toshiba TLP510E: Manual de servicio (33 páginas)

Imprimir página

3. OPTICAL SYSTEM

3-1. Configuration

No.

Name

UHP lamp

Lamp

unit

Parabolic

reflector

UV IR filter

Multi-lenses

A, B

Polarization

light beam

splitter (PBS)

Phase

difference

plate

Condenser

lens

Dichroic

mirror

Mirror

box

Full reflection

unit

mirror

Field lens

Relay lens

Incident side

polarized

plate/Phase

difference

plate

Liquid crystal

Prism

panel

unit

Cross prism

Projec-

Projection

tion

lens

Light source of the optical system. AC lighting system 120W, arc length 1.3 mm.

As the arc length is shorter than the conventional metal halide lamp, the light source

operates as an ideal light point source and this improves the light convergence factor.

Also, the color temperature gets higher and this allows to reproduce more natural

white color.

Parabolic reflector converges light emitted from the UHP lamp forward in approximate

parallel light beams and illuminates the liquid crystal panel.

Optical filter to pass necessary visible rays and cut unnecessary ultraviolet rays and

infrared rays among light emitted from the UHP lamp.

Two multi-lenses A and B allow a circular beam light emitted from the light source to

illuminate the square liquid crystal panel evenly, thus providing projected pictures

with less brightness variation.

Separates the illuminating light from the light source into P polarization light and S

polarization light and leads both light to the multi-lens B with a little angle.

Converts the polarization direction of incident light via the multi-lens B into another

direction. Here, P polarization light waveform separated by PBS is converted into

another S polarization light waveform.

Converges the illuminating light emitted from the light source into the liquid crystal

panel.

Separates the white light emitted from the light source into RGB three primary colors.

The white light emitted from the light source reflects B light using a dichroic mirror 1

and the RG lights pass through the dichroic mirror 1. Of the RG lights passed, G light

is reflected by the dichroic mirror 2 and R light passes.

Reflection mirror to lead the R and B lights separated by the dichroic mirrors 1 and 2

to the liquid crystal panel.

Light transmitted through liquid crystal panel is converged in direction of focal point

and effectively entered entrance pupil of the projection lens.

In the R axis optical path which is longer than those of G, B, the relay lens works as

a correction lens to arrange the illumination distribution of the liquid crystal panel

surface with that of other liquid crystal panel.

The illumination lights separated into RGB have the S polarizing waveform compo-

nent in processing the PBS and phase difference plate operation previously de-

scribed.

The incident side polarized plate arranges the illumination light more effective direct

polarizing waveform. The phase difference plate used works to converge the S

polarizing waveform into the P polarizing waveform which fits to the transparent axis

of the liquid crystal panel.

Since the phase difference plate possesses the wavelength characteristics for light,

each RGB axis employs exclusive phase difference plate. These polarizing plates

and difference plates are constructed in one plate by attaching each other, and put

on a glass plate.

To increase the color purity ratio of three primary colors, the glass plate possess the

dichroic filter characteristics for RG axis.

Light exit side polarized plate is put on the light exit plane. When no signal voltage is

applied, the polarization direction of transmission light rotates by 90 degrees. When a

voltage is applied, the polarization direction is controlled owing to the voltage

applied. That is, the liquid crystal panel employs such general TN type liquid crystal.

In this model, the incidence/exit polarization plate is placed (in normally white mode)

so that the light transmission amount becomes maximum (white) when no voltage is

added and the light transmission amount becomes minimum (black) when maximum

voltage is added.

According to the liquid crystal panel specification, exclusive panel for each RGB axis

is employed and shown by identification seals.

Works to mix RGB lights passed through the liquid crystal panel.

Demodulated by the video signal on the liquid crystal panel and projects pictures

displayed on the liquid crystal at a screen. Light axis of the projection lens is set at

upper side of center of the liquid crystal panel and this realizes easy viewing of the

panel because the projected screen position is upper than the unit position. The

projected light shows S polarizing waveform and is compatible with the polarizing

screen.

The projection lens employs the zoom & focus system and allows to project enlarging

a picture upto maximum approx. 300 inch.

3-1

Description