Epson VS230 Manual de instrucciones - Página 8

Navegue en línea o descargue pdf Manual de instrucciones para Software Epson VS230. Epson VS230 48 páginas. Warranty statement
También para Epson VS230: Manual de configuración rápida (4 páginas), Declaración de conformidad (4 páginas), Configuración rápida (4 páginas)

Imprimir página

Installing EasyMP Monitor

• If your operating system is Windows 8

"C:\Users\(User Name)\AppData\Local\VirtualStore\Program

Files\EPSON Projector\EasyMP (or EMP) Monitor Ver. x.xx (Ver. x.xx

represents the software version)"

If you cannot find the "AppData" folder, from the Start menu, click

"Control Panel" - "Appearance and Personalization" - "Folder Options".

Select "View" tab, and then configure the "Show hidden files, folders,

and drives" setting in "Advanced settings".

After installing this software, follow the instructions below before

starting EasyMP Monitor to transfer the settings.

• If your operating system is Windows 2000 or Windows XP

Overwrite the existing EMP Monitor.dat file with the copy you made.

The existing EMP Monitor.dat file is in "C:\Program Files\EPSON

Projector\EasyMP Monitor Ver.x.xx".

• If your operating system is Windows Vista, Windows 7, or Windows 8

Place the copy of the EMP Monitor.dat file in "C:\Users\(User

Name)\AppData\Local\VirtualStore\Program Files\EPSON

Projector\EasyMP Monitor Ver.x.xx".

The software name has been changed.

Before: EMP Monitor _ After: EasyMP Monitor

If you are already using EMP Monitor, you can replace with this software.

Installing

You must have administrator authority in order to install EasyMP

Monitor.

To download the software and manual, visit

your location.

www.epson.com

and select

Double-click the downloaded software file to start the install program.

Follow the on-screen instructions.

If EasyMP or EMP Monitor is already installed, uninstall it before

installing this software. s "Uninstalling EasyMP Monitor"

Limitations imposed by a Windows Vista, Windows 7,

or Windows 8 environment

When using EasyMP Monitor under Windows Vista, Windows 7, or

Windows 8, note the following limitations.

• You must have administrator authority in order to use Register at

startup on the Environment setup screen of EasyMP

Monitor.s "Monitoring using the system tray"

• If EasyMP Monitor is installed on your computer, uninstall it before

you update the operating system to Windows Vista, Windows 7, or

Windows 8. Updating your OS without uninstalling the software may

cause a malfunction. s "Uninstalling EasyMP Monitor"

Before starting operations

Check the following points before starting up EasyMP Monitor.

• EasyMP Monitor must be installed on the computer to be used for

monitoring and control.

• The computer and the projectors must be connected to the network.

• Depending on the projector model, a commercially-available serial W

TCP/IP conversion adapter and a connection cable are required in

order to use EasyMP Monitor. See your projector's User's Guide.

Make the settings for the serial W TCP/IP conversion adapter before

connecting to the projector.

p.47

p.27

p.47