Dimplex XHD28G Manual de servicio - Página 16
Navegue en línea o descargue pdf Manual de servicio para Chimenea de interior Dimplex XHD28G. Dimplex XHD28G 16 páginas.
También para Dimplex XHD28G: Manual de servicio (14 páginas), Manual del usuario (18 páginas), Manual de servicio (14 páginas)
Imprimir página
Light is leaking out around the log set
Heater
Heater is not turning on
Heater cuts out after a short time
Noise
Excessive noise when the heater is on
Excessive noise when flames are on
REV
PCN
DATE
01
-
29-AUG-19
02
-
23-DEC-19
03
-
6-OCT-20
1-888-346-7539 | www.dimplex.com
In keeping with our policy of continuous product improvement,
we reserve the right to make changes without notice.
© 2020 Glen Dimplex Americas
Log set is not positioned properly in
the unit
Set temperature is below room tem-
perature
Heat is disabled; --- is displayed when
heat button is pressed
Defective heater assembly
Defective main control board
Inadequate air circulation
Buildup of dust/debris
Defective heater assembly
Buildup of dust/debris in the heater
assembly
Defective heater assembly
Flicker rod is hitting or rubbing against
internal component
Defective flicker motor
See instructions for replacing log set.
Ensure logset is connected to base
panel.
See operation instructions
See operation instructions
Replace heater assembly
Replace main control board
Ensure that there is sufficient space
around the firebox. Install feet if nec-
essary.
Ensure that the exterior intake louvers
and firebox cavity are free of dust/
debris
Replace heater assembly
Ensure that the exterior intake louvers
and firebox cavity are free of dust/
debris
Replace heater assembly
Ensure that the flicker rod is straight
and mounted properly in the bracket;
and spinning freely away from other
components. Replace the flicker rod if
necessary.
Replace flicker motor