CRRCpro GF45I Manual - Página 5

Navegue en línea o descargue pdf Manual para Motor CRRCpro GF45I. CRRCpro GF45I 8 páginas.

model that was flying.

Note:

For break-in a smaller propeller is recommended.

Important:

1.Remember that when the engine running ever person must stay behind

the line of the rotating propeller; never to the side or the front!

2.The engine needs 12-20 hours running time for the break in process to

be 100% complete.

Engine Cooling

A proper cooling system is vital for any engine. An air cooled engine

requires an appropriately sized air intake. Also to keep this air cooling

process working the incoming air must be exhausted. Further, the exhaust

air outlet should be four times (4X) the size of the cool air intake.

Example:

. 10 square inches of air intake area would require

. 40 square inches of exhaust air outlet area

It is up to you to insure that the air flows freely to, over, and away from,

the hot cylinder(s) and muffler(s). Please refer to Engine Installation for

motor box considerations, and to the following tips on baffling.

Note:

1.The DC-CDI is a very accurate electronic equipment,Offers enough fire

energy and normal rotational speed of maintaining of engine from it to

spark plug

2.We offer the guarantee of one year to this department product (Base on

the premise that the appearance has not been damaged )

3.Please don't try to resolve and repair it,We will not bear any

responsibility to dismantle and resolve the consequence that DC-CDI