CRS HUDDLECAMHD-3X Cómo hacerlo - Página 2

Navegue en línea o descargue pdf Cómo hacerlo para Sistema de conferencias CRS HUDDLECAMHD-3X. CRS HUDDLECAMHD-3X 3 páginas. Lip the image

1. Connect HuddleCamHD USB cable to the USB port on the HuddleCamHD

2. Connect the USB cable from the HuddleCamHD to the USB port on the computer

3. Connect the power supply to the nearest outlet

4. Plug the power cable into the power port on the HuddleCamHD

5. Wait for the camera "boot-up" sequence where the head of the camera will Pan, Tilt and Zoom

6. Please locate the remote for the HuddleCamHD and ensure it has batteries

a. Point the remote at the HuddleCamHD front, labeled "HuddleCam" and click on the

"REV" button

b. If that DID NOT work please proceed to the Step 7 below

7. Open the AMCAP software

a. Click on the "Devices" menu

b. Select the HuddleCamHD, possibly labeled "USB Camera" or "USB3 Camera"

c. You should now be seeing you HuddleCamHD in the preview window

d. Click on the "Options" menu and select "Video Capture Pin"

i. Make sure the "Output Size" is set to "1280 x 720" or "1920 x 1080"

ii. Click "OK"

8. Please locate the remote for the HuddleCamHD

a. Point the remote at the HuddleCamHD front, labeled "HuddleCam" and click on the

"REV" button

b. If that DID NOT work please proceed to the Step 9 below

9. Connect the VISCA cable to the HuddleCamHD

10. Connect the other end of the VISCA cable to your serial port

a. Ensure you know the current port number of your serial port

i. You can check this by going to Windows Device Manager

ii. Scroll down to "Ports (COM & LPT)" and expand the tree

iii. Look for the serial port you're using and note the COM# that it displays

1. If the number is above 4 you will need to reassign the COM Port to a

new number that is 4 or below

2. You can accomplish this by right clicking on the Serial Device in

Windows Device Manager that you just located and selecting

"Properties"

3. Go to "Port Settings"

4. Click "Advanced"