CRU WiebeTech Forensic ComboDock Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Estación de acoplamiento CRU WiebeTech Forensic ComboDock. CRU WiebeTech Forensic ComboDock 6 páginas.

Imprimir página

CRU WiebeTech Forensic ComboDock User Manual

being used. Make sure that the Forensic ComboDock is in Read-Write Mode before attempting to format a drive

attached to it. Note that formatting a drive will erase all data on the drive, so be sure to back up your data

before beginning this operation.

2 HOW TO USE THE LCD INTERFACE

Use the LCD and 4-button navigation interface to view information about the attached drive and the Forensic

ComboDock. On the 4-button interface, Up and Down allow you to scroll through options, while Enter

option and Back goes back to the previous screen.

MENU ITEM

SUBMENU ITEM

View Drive Info

Disk Temp

Capacity (MB)

Manufacturer

Model number

Serial number

Firmware rev

HPA size (MB)

DCO size (MB)

Disk health

Start/Stops

Power cycles

Bad sectors

View Dock Info

Product Name

Unique ID#

Firmware Ver. #

Mode

Create HPA/DCO

Supported in R/W

Mode Only

Set DCO Size

Set HPA Size

Protecting Your Digital Assets

Displays the temperature of the attached drive, displayed in °C.

Displays the capacity of the attached drive, measured in megabytes.

Displays the manufacturer of the attached drive.

Displays the model number of the attached drive.

Displays the serial number of the attached drive.

Displays the firmware revision of the attached drive.

Displays the size of the host protected area, if any, on the attached

drive. Measured in megabytes.

Displays the size of the device configuration overlay, if any, on the

attached drive. Measured in megabytes.

Displays the S. M. A. R. T. status of the attached drive.

Displays how many times the attached drive has spun up and spun

down.

Displays how many power on/off cycles the attached drive has

undergone.

Displays the number of bad sectors reported by the attached drive.

Displays the brand name of the product (e.g. Forensic ComboDock)

Displays the specific, unique number assigned to the unit for

identification, akin to a serial number.

Displays the version of the firmware currently installed on the

Forensic ComboDock.

Displays whether the Forensic ComboDock is running in Write-

Blocked or Read-Write mode.

Appears when the Forensic ComboDock is in Write-Blocked mode.

The other two submenu options are disabled.

This option is only available if no HPA exists on the drive. It allows

you to set a new size for the DCO. Press Up or Down to set a new

size for the HPA, and Enter to confirm the choice. The disk capacity

available to a computer will be reduced by this amount. Set the value

to 0 to have no DCO. Values exceeding the available capacity will not

be accepted.

Allows you to set a new size for an HPA. Press Up or Down to set

a new size for the HPA, and Enter to confirm the choice. The disk

capacity available to a computer will be reduced by this amount.

Set the value to 0 to have no HPA. Values exceeding the available

capacity will not be accepted.

ACTION

selects an