Crucial MX Series Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Almacenamiento Crucial MX Series. Crucial MX Series 9 páginas.

When you first slot your SSD into the storage drive bay, it might not fit securely. If this occurs,

Brackets, adapters, support frames, braces, pull tabs, or screws

Look closely at the old storage drive you removed for any brackets, adapters, support frames, braces, pull tabs,

or screws that might be attached to it. If anything is attached to the old drive, remove it and put it on the SSD

in the same manner. Now reinsert the SSD into the storage bay. If it still doesn't fit snug, use the spacer you set

aside earlier and attach it to the SSD by peeling off the adhesive and sticking it onto the drive as shown. Attaching

the spacer allows the SSD to achieve the same level of thickness as the existing drive you removed. Note: many

Some storage bays and existing hard drives are

significantly larger than a standard size SSD. If this is the

case in your system, you'll need a 2.5-inch to 3.5-inch

converter to make the SSD fit snug. You can get one of

these on www.crucial.com.

Millions of people around the world have made their computers faster by installing a Crucial SSD.

here's what to do based on the type of system you're installing into.

installations don't require the spacer, so you may not need to use it.

For desktops

No computer skills are required!

Part 4: Download

This free software helps your SSD become even faster and allows

the drive to get periodic performance updates. On the computer

Helpful Tip

For laptops

Did You Know...?

1. Enable Storage Executive

you installed the SSD in, go to http://uk.crucial.com/se.

Spacer

Page 7