Aeon AEOTEC GEN5 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Accesorios Aeon AEOTEC GEN5. Aeon AEOTEC GEN5 8 páginas. Door window sensor

23-2-2017

Quick Start.

The installation of your Door Window Sensor has two major steps: the Main Sensor and the Magnet. Your Door Window

Sensor will use wireless technology to talk to your Z-Wave network once paired to your Z-Wave network. Selecting where

you'll place your Door/Window Sensor in your home is just as important as the actual aﬃxing it to the surface. Whether

it's for security or intelligence purposes, your sensor: With your mounting plates prepared to hold each component of your

sensor, it's time to add it to your Z-Wave network. With your sensor added to your Z-Wave network, it's now time to insert

each main part of your sensor into the corresponding sensor plate.

1. Should be aﬃxed indoors and away from sources of moisture.

2. Placed within 30 meters of another Z-Wave device that is either a gateway or not powered by batteries.

3. The magnet and the main sensor must be less than 2cm apart. Main sensor must be aﬃxed to the door or window

and the magnet must be aﬃxed to the frame. The magnet and the main sensor must separate when the door or

window is opened.

4. Should not be mounted on a metal frame.

Aﬃx your Sensor plates to a surface. The Mounting plates can be aﬃxed using screws or double-sided tape. If you are

using screws, attach both mounting plates to the respective surface using the two 20mm screws provided.

https://aeotec.freshdesk.com/support/solutions/articles/6000159782-door-window-sensor-gen5-user-guide-

Door Window Sensor Gen5 (User Guide) : Aeotec by Aeon Labs

4/8