Aeon Labs AEOEZW100 Manual de inicio rápido - Página 4

Navegue en línea o descargue pdf Manual de inicio rápido para Accesorios Aeon Labs AEOEZW100. Aeon Labs AEOEZW100 11 páginas. Routing multisensor

Operating the device

Once you installed the Multisensor and included it into your Z-Wave network the sensor will begin to send its data to the controller. The

data will be shown in the interface of your controller but you can also use it to control your home. Simply define scenes that use the

transmitted data from the Multisensor as input and control other devices based upon this data. For example you could close the window

blinds when it gets too bright in the room or dim the lights. If you are not at home you can let the controller notify you if the Multisensor

detects a motion inside your home. Or maybe you want to regulate your heating with the Multisensor's build-in temperature sensor.

The Node Information Frame is the business card of a Z-Wave device. It contains information about the device type and the technical

capabilities. The inclusion and exclusion of the device is confirmed by sending out a Node Information Frame. Beside this it may be needed

for certain network operations to send out a Node Information Frame.

There are 2 ways to send a NIF (Node Information Frame). To send an unsecure NIF press the action button on the back of the Multisensor

once. This is used for all controllers that do not use Z-Wave Plus. If your controller is capable of Z-Wave Plus you can use the secure NIF

by pressing the action button twice during one second.

Associations

Z-Wave devices control other Z-Wave devices. The relationship between one device controlling another device is called association. In

order to control a different device, the controlling device needs to maintain a list of devices that will receive controlling commands. These

lists are calledassociation groups and they are always related to certain events (e.g. button pressed, sensor triggers, ...). In case the

event happens all devices stored in the respective association group will receive a common wireless command.

Association Groups:

Group 1 (max. nodes in group: 5)