Dimplex QSH-125 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Calentador eléctrico Dimplex QSH-125. Dimplex QSH-125 17 páginas. Quantum storage heater

Imprimir página

Operation

5. SELECTOR DIAL can be turned clockwise

and counter clockwise, and enables the re-

quired room temperature to be adjusted. The

screen color changes for warmer and cooler

settings, showing deep blue through to bright

red.

To check what setting the heater is currently

using press the selector dial once and the

timer mode will be displayed e.g. 'Work

Week'.

NOTE: The selector dial is also used in combi-

nation with the menu button to select and confirm

your settings.

Setting the Date and Time

Your Quantum controller incorporates a real time

clock with a calendar function. The time clock has

a battery back up that will keep the clock running in

the event of a power outage.

To adjust the time or date follow the steps below.

NOTE: The display screen will return to stan-

dard display after a period of 20 seconds of inactiv-

ity.

•

Press the Menu Button (1).

•

Select Date/ Time by pressing the control dial

(2).

•

Rotate the dial to select the correct 'day' and

press the centre of the dial to select.

•

Rotate the dial to select the correct 'Day of

the Month' and press the centre of the dial

to select. Repeat this operation until date and

time have been sent and the display returns to

the Main Menu.

NOTE: When the heater is initially installed, a

Warning Message may appear. This means the

real time clock has not been initialized. This can be

set by pressing the Menu button and following the

above steps to set the time.

Choosing and Setting a Timer Mode

Your Quantum controller comes pre-programmed

with a set of operating periods. There are four op-

tions available - three preset (Work Week, Home

All Day and Holiday), and one user setup (Manu-

al).

The preset options include days and times (out-

lined below) that are pre-programmed to release

heat based on temperature set points.

The heater is programmed so that the amount of

heat that is stored is adjusted depending on the

time of the year, i.e. in January the heater will be

using the full capacity of the storage capabilities

and in April only a portion will be used. Also the

settings for the months May - August the storage

ability is disabled, so if the controller calls for heat

the supplemental element will provide it and no

heat will be stored.

NOTE: The Work Week, Home all Day and

Manual timer modes will use the comfort tempera-

ture during the "On" times and a setback tempera-

ture during the "Off" times. How to set the setback

temperature can be found under the description of the

"Options" Menu in this document.

1. Work Week (pre-programmed) - Has the fol-

lowing preset times, which can be altered if

desired;

Monday – Friday: On 6:00 am until 8:00 am