Dimplex XLS18N Manual de instrucciones de instalación - Página 4

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Calentador eléctrico Dimplex XLS18N. Dimplex XLS18N 8 páginas. Ultra-slim storage heaters
También para Dimplex XLS18N: Manual de instrucciones (10 páginas), Instrucciones de uso (4 páginas), Instrucciones de uso (4 páginas), Manual de instrucciones de instalación (8 páginas), Manual de instrucciones de instalación (8 páginas)

11. Solid Brick/High Density Block Walls. (See step 12

if walls are low density block.) These must be drilled

and plugged with the No. 10 size plastic inserts provided.

The correct size of drill (8mm) should be used and the

hole should be drilled to a depth of 15mm greater that the

length of the plastic insert so that the ﬁ xing is made below

the plaster layer.

12. Low Density Block Walls. A specialised ﬁ xing, such

as the Uniﬁ x LB70, should be employed following closely

the manufacturer's instructions.

Panelled Internal Walls. Here it is best to locate the

studding and use No. 10 size woodscrews. Where it is

not possible to locate the studding use type M5 Rawlplug

INTERSETS on securely fastened plasterboard panelling.

For other wall panel materials the wall panel manufacturer

should be consulted for details of suitable wall ﬁ xing

devices.

13. If left hand cable connection is required, the mains

lead must be secured to the back of the heater using ties

provided in the ﬁ xing kit. Ensure sufﬁ cient spare cable is

available to make the mains connection.