Dimplex DCTF92R Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Ventilador Dimplex DCTF92R. Dimplex DCTF92R 8 páginas. 92cm tower fan with remote

Assembly

3. Rotating the base in a clockwise direction, once the base and body (E) of the fan

click in together, use two screws to secure it in place.

4. Lastly fit the cable into the base as shown (F) and fit 8 screws into the base as

shown above. Warning: The two screws in the middle are smaller.

Operation

This tower fan can be operated by the control panel or remote control. Please refer to

the below diagrams for descriptions.

Control Panel Buttons

Speed

Speed button

Mode button

Remote Control Buttons

The remote control uses 2 x AAA batteries (not supplied). Open the battery cover and

install the batteries ensuring the correct polarity. Replace the battery cover.

The remote requires a line of sight for the signal to be received by the unit. If the remote

no longer works, try replacing the batteries. Do not mix new and old batteries.

Press the POWER button to turn the fan ON and press the same button to turn the fan

OFF.

There are 3 SPEED settings – Low, Medium and High. You can adjust the fan speed by

pressing the SPEED button.

Press the TIMER button the set the auto-off timer in 0.5 hour increments, up to a

maximum of 7.5 hours. The fan will turn off once the time has elapsed.

Press the MODE button to select either Normal, Natural or Sleep modes. Note: The MODE

display will change depending on the MODE selected. NL = Normal mode, NT = Natural

mode & SL = Sleep mode.

Press the OSC button to start/stop the left to right oscillation function.

Power button

OSC

Oscillation button

Timer

Mode

Timer button