Dimplex ComfortAir DIM2IN1 Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Aire acondicionado Dimplex ComfortAir DIM2IN1. Dimplex ComfortAir DIM2IN1 11 páginas. Comfortair 2in1 air conditioner and dehumidifier
CONTROL PANEL & DESCRIPTION
OF FUNCTIONS
8
7
6
5
1.
POWER KEY
Press to turn ComfortAir "ON" or "OFF"
2.
FUNCTION
Press to select dehumidifying, cooling or fan mode
3.
SWING
Press this key and the outlet will oscillate. Press again to stop oscillation.
The outlet will close automatically when you turn the ComfortAir off.
4.
INCREASE TEMPERATURE OR HUMIDITY (+)
During cooling function: press to raise the desired room temperature by 1°C.
The maximum temperature possible is 30°C.
During dehumidifying function: press to raise the desired humidity by 5%.
The maximum limit is 90%.
9
10
8
CONTROL PANEL & DESCRIPTION
OF FUNCTIONS
5.
DECREASE TEMPERATURE OR HUMIDITY (-)
During cooling function: press to lower the desired room temperature by
1°C. The minimum temperature possible is 17°C.
During dehumidifying: press to lower the humidity by 5%. The minimum limit
is 30%. Or press until you see "CO" for Continuous Dehumidification.
1
6.
SPEED
2
Press to select either LOW, HIGH or AUTO fan speed.
If "AUTO" is selected (during cooling function), the ComfortAir will
automatically select either "HIGH", or "LOW" speeds depending on how
quickly the room needs cooling (i.e. based on the difference between the
3
desired temperature and ambient room temperature).
The ComfortAir will run on "HIGH" speed if the ambient room temperature
is higher than the desired temperature by 2°C or more and run on "LOW"
4
speed if less than 2°C.
7.
SLEEP MODE
This function cools the room initially to help you get to sleep, but allows the
temperature to increase in the room to minimize energy usage.
1. While in cooling mode, press the SLEEP key
2. Set the desired temperature
After one hour, the desired temperature will increase by 1°C. It will then
increase by another degree after another hour.
Press the SLEEP key again to cancel the sleep setting.
continued
9