Aeon Labs AEO MULTISENS Manual de inicio rápido - Página 5

Navegue en línea o descargue pdf Manual de inicio rápido para Sensores de seguridad Aeon Labs AEO MULTISENS. Aeon Labs AEO MULTISENS 8 páginas. Z-wave motion sensor, temperature sensor, humidity sensor and lightness sensor in one package

Imprimir página
A
Z-Wave devices control other Z-Wave devices. The relationship between one device controlling
another device is called association. In order to control a different device, the controlling device needs to
maintain a list of devices that will receive controlling commands. These lists are called association groups
and they are always related to certain events (e.g. button pressed, sensor triggers, ...). In case the event
happens all devices stored in the respective association group will receive a common wireless command.
Association Groups:
Devices to be switched on upon motion deteced and off after a timeout (on time) (max. nodes in
1
group: 5)

Configuration Parameters

Z-Wave products are supposed to work out of the box after inclusion, however certain configuration can
adapt the function better to user needs or unlock further enhanced features.
IMPORTANT: Controllers may only allow to configure signed values. In order to set values in the range 128
... 255 the value sent in the application shall be the desired value minus 256. For example: to set a
parameter to 200? it may be needed to set a value of 200 minus 256 = minus 56. In case of two byte value
the same logic applies: Values greater than 32768 may needed to be given as negative values too.
Sensor report type on Get without instances (Parameter Number 1, Parameter Size 1) Which type of multi
sensor report should be sent on multi sensor Get command without instances
Value
0
Temperature, humidity and luminance (Default)
1
Temperature
2
Luminance
3
Humidity
Wake up 10 minutes when batteries are inserted (Parameter Number 2, Parameter Size 1) Stay awake for
10 minutes after batteries are inserted
Value Description
0
No (Default)
1
Yes
On time (Parameter Number 3, Parameter Size 2) How long should the device associated to multi senor
keep state On before sending it Off command (if the value is bigger than 255, the value would be rounded to
next integer in minutes)
(c) 2016 Z-Wave Europe GmbH, Antonstr. 3, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 5
Description