DimSport RapidBike EVO Manual de instrucciones de instalación - Página 8
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Accesorios para motocicletas DimSport RapidBike EVO. DimSport RapidBike EVO 12 páginas.
___________________________ Installing instructions
_____________________________ Final Section_____________________________
14. Connect the Rapid Bike wiring harness to the RAPID BIKE module.
15. Check the correct connection of all the connectors.
16. Fix the RAPID BIKE control unit to the motorbike in the underseat compartment.
17. Place back the fuel tank and the seat.
__________________________ Accessories section ___________________________
The Rapid Bike wiring has four other connections for the accessories:
Connection for the quickshifter sensor (black 3 pin connector)
-
Connection for the handlebar switchmap (black 2 pin connector)
-
Connection for the CAN Bus interface (white 3 pin connector)
-
Connection for the USB interface (white 4 pin connector)
-
Issued by: PM
approved by DG
______________________________
Rev.07
date 01/03/16
pag. 8/12