DimSport RapidBike Racing Manual de instrucciones de instalación - Página 2
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Accesorios para motocicletas DimSport RapidBike Racing. DimSport RapidBike Racing 12 páginas.
Imprimir página___________________________ Installing instructions
Attention: For a correct RB feeding voltage, check the operation of all motorbike
electrical system components (lights, fuse, stock connectors, etc.).
1. Turn off the engine.
2. Remove the main seat and the fuel tank.
____________________________ Injection section ___________________________
3. Locate and disconnect the 2 way connector of the front cylinder's injector.
4. Connect Rapid Bike connectors marked as INJECTOR 1 in-line of the stock
harness.
5. Locate and disconnect the 2 way connector of the rear cylinder's injector.
6. Connect Rapid Bike connectors marked as INJECTOR 2 in-line of the stock
harness.
WARNING: In case the harness has one couple of 6-way connectors marked as
"INJECTORS", then follow the instructions at the bottom of this manual (Page 9).
Issued by: PM
approved by DG
______________________________
Rev.07
date 01/03/16
pag. 2/12