Pioneer AVG-VDP1 Manual de instalación - Página 14

Navegue en línea o descargue pdf Manual de instalación para Receptor para automóvil Pioneer AVG-VDP1. Pioneer AVG-VDP1 30 páginas. Vehicle dynamics processor
También para Pioneer AVG-VDP1: Manual (39 páginas)

Imprimir página

Installation

When installing the antenna inside the vehicle (on the rear shelf)

Affix the metal sheet on as level a surface as possible where the GPS antenna faces the

window. Place the GPS antenna on the metal sheet. (The GPS antenna is fastened with its

magnet.)

Note:

• When attaching the metal sheet, do not cut it into small pieces.

• Some models use window glass that does not allow signals from GPS satellites to pass through. On

such models, install the GPS antenna on the outside of the vehicle.

GPS antenna

Metal sheet

Peel off the protective sheet.

Clamps

Use clamps to secure the

lead where necessary inside

the vehicle.

Make sure the surface is free of

moisture, dust, grime, oil, etc.,

before affixing the metal sheet.

Note:

• The metal sheet contains a

strong adhesive which may

leave a mark on the surface

if it is removed.