Pioneer AVG-VDP1 Manual de instalación - Página 4

Navegue en línea o descargue pdf Manual de instalación para Receptor para automóvil Pioneer AVG-VDP1. Pioneer AVG-VDP1 30 páginas. Vehicle dynamics processor
También para Pioneer AVG-VDP1: Manual (39 páginas)

Imprimir página

Connecting the Units

WARNING:

• To avoid the risk of accident and the

potential violation of applicable laws,

certain functions of this unit should

never be used while the vehicle is being

driven. Also, rear displays should not be

in a location where it is a visible distrac-

tion to the driver.

• In some countries or states the viewing

of images on a display inside a vehicle

even by persons other than the driver

may be illegal. Where such regulations

apply, they must be obeyed.

CAUTION:

• PIONEER does not recommend that

you install or service your Vehicle

Dynamics Processor yourself. Installing

or servicing the product may expose you

to risk of electric shock or other haz-

ards. Refer all installation and servicing

of your Vehicle Dynamics Processor to

authorized Pioneer service personnel.

• Secure all wiring with cable clamps or

electrical tape. Do not allow any bare

wiring to remain exposed.

• Do not drill a hole into the engine com-

partment to connect the yellow lead of

the unit to the vehicle battery. Engine

vibration may eventually cause the insu-

lation to fail at the point where the wire

passes from the passenger compartment

into the engine compartment. Take

extra care in securing the wire at this

point.

• It is extremely dangerous to allow the

GPS antenna cable to become wound

around the steering column or shift

lever. Be sure to install the unit in such

a way that it will not obstruct driving.

• Make sure that wires will not interfere

with moving parts of the vehicle, such as

the shift lever, parking brake or seat

sliding mechanism.

• Do not shorten any leads. If you do, the

protection circuit may fail to work

properly.