Pioneer AVIC-5100NEX Manual de instalación - Página 34
Navegue en línea o descargue pdf Manual de instalación para Receptor para automóvil Pioneer AVIC-5100NEX. Pioneer AVIC-5100NEX 34 páginas. System firmware update instructions
También para Pioneer AVIC-5100NEX: Manual de actualización del firmware (7 páginas), Manual de instrucciones (10 páginas)
Imprimir página
Section
04
After installation
After installing this product
1
Reconnect the negative (–) terminal of
the vehicle's battery.
First, double-check that all connections are
correct and that this product is installed cor-
rectly. Reassemble all vehicle components
that you previously removed. Then reconnect
the negative (–) cable to the negative (–) term-
inal of the battery.
2
Start the engine.
3
Press the RESET button.
Press the RESET button on this product with a
pointed object such as the tip of a pen.
8100NEX 7100NEX
6100NEX 5100NEX
p Some of the settings and recorded contents
will not be reset.
4
Change the settings as desired.
= For details concerning operations, refer to
Operation Manual.
34
En
5
Drive down an unobstructed road until
the GPS starts receiving the signal nor-
mally.
Note
After installing this product, be sure to check at a
safe place that the vehicle is performing normal-
ly.