Pioneer AVIC-X1 Manual de hardware - Página 16
Navegue en línea o descargue pdf Manual de hardware para Receptor para automóvil Pioneer AVIC-X1. Pioneer AVIC-X1 30 páginas. Dvd navigation av headunit
También para Pioneer AVIC-X1: Manual rápido (12 páginas)
MAN-AVIC-X1-EN HW.book Page 14 Friday, January 16, 2004 11:41 AM
Loading a disc
• Insert a disc into the disc loading slot.
Format reading will start.
For DVD-video, CD
DISC AUTO is off in the default setting.
DISC AUTO
Operation Manual
When a disc is already loaded in this unit,
select the source by pressing SRC button.
To eject a disc, press EJECT button.
For the map disc
Inserting the disc starts DVD navigation
mode.
Removing the disc sets Memory navi
mode.
You can use NAVI/AV button to switch
between navigation map displays and audio
operation displays.
The DVD drive plays one, standard, 12-cm or
8-cm (single) disc at a time. Do not use an
adapter when playing 8-cm discs.
Do not insert anything other than a disc into
the disc loading slot.
Playable discs
Page 6
If you cannot insert a disc completely or if
after you insert a disc the disc is not
recognised, check that the label side of the
disc is up. Press EJECT button to eject the
disc, and check the disc for damage before
inserting the disc again.
If the DVD drive does not operate properly, an
error message such as ERROR-11 may be
displayed.
Error messages
Operation Manual
14
Adjusting the volume
• Use VOLUME to adjust the audio sound
level.
With this product, rotate VOLUME to
increase or decrease the volume.
To adjust the navigation volume, go to the
navigation menu.
Navigation volume adjustment
Operation Manual
Turning the source off
• Press SRC button and hold until the
source turns off.
This product can be switched off by
turning the ACC (ignition) OFF or
detaching the front panel.
Using the REAR button
You can output the sound and video of the disc in
the built-in DVD drive to the rear display
regardless of whether DVD drive is selected as
the source or not (REAR ON mode).
• When you have turned the REAR ON mode
on by pressing REAR button, you cannot
turn it off even if you press SRC button
and hold. In this case, press REAR button
to turn the REAR ON mode off.
• Press REAR button to turn the REAR ON
mode.
The sound and video are outputted to the rear
display and the illumination colour of REAR
button changes to different colour.
To turn the REAR ON mode off, press
REAR button again.
When a CD or CD-ROM is inserted, sound
only is output to the rear display.
Selecting the video of rear display
Operation Manual