Pioneer AVIC-X930BT Instrucciones de actualización del firmware - Página 2

Navegue en línea o descargue pdf Instrucciones de actualización del firmware para Receptor para automóvil Pioneer AVIC-X930BT. Pioneer AVIC-X930BT 2 páginas. Multimedia av navigation receiver
También para Pioneer AVIC-X930BT: Instrucciones de actualización del firmware (2 páginas), Manual de inicio rápido (2 páginas)

Imprimir página

Pioneer AVIC-X930BT Instrucciones de actualización del firmware

If your system does not reboot and start the update process within one minute, then please check your system and

microSD card as follows:

•

Check the model number of your navigation system and version number of your current software, as

detailed above in the "Before Updating" section.

•

Check the microSD Card and confirm that the 'AVICZ110' folder is the only folder on the microSD card.

There should be no other files.

Step 4

Please wait a few minutes (approximately 3 to 5 minutes) for the firmware update to be completed. The AVIC-

X930BT will automatically reboot after the firmware update is completed.

Step 5

Once the firmware update is completed, please perform the following steps to confirm that the firmware update was

successful:

•

Press the "HOME" key

•

Select the "Settings" tab

•

Select "System Settings"

•

Select "Service Information"

•

Press & hold left upper corner of the "Service Information" screen for a few seconds

•

Confirm that your system correctly displays the below information:

Platform Version: 3.000

Application Version: 3.002

Step 6

Please eject the microSD Card from the AVIC-X930BT. Your AVIC-X930BT is now ready for use.

Questions

If you have any questions, please contact Pioneer Customer Service toll free at 800-421-1404, Monday through

Friday from 10:30 AM – 2:30 PM and 3:30 – 7:00 PM (Eastern Time), except holidays.

------------------------------------------------------------