Pioneer DEH-4090MP Manual del usuario - Página 28

Navegue en línea o descargue pdf Manual del usuario para Receptor para automóvil Pioneer DEH-4090MP. Pioneer DEH-4090MP 34 páginas.

Imprimir página

Section

Installation

Important

! Check all connections and systems before

final installation.

! Do not use unauthorized parts. Use of un-

authorized parts may cause malfunctions.

! Consult your dealer if installation requires dril-

ling of holes or other modifications to the vehi-

cle.

! Do not install this unit where :

— it may interfere with operation of the vehi-

cle.

— it may cause injury to a passenger as a re-

sult of a sudden stop.

! The semiconductor laser will be damaged if it

overheats. Install this unit away from hot

places such as near the heater outlet.

! Optimum performance is obtained when the

unit is installed at an angle of less than 60°.

! When installing, to ensure proper heat disper-

sal when using this unit, make sure you leave

ample space behind the rear panel and wrap

any loose cables so they are not blocking the

vents.

DIN front/rear mount

This unit can be properly installed either from

"Front" (conventional DIN front-mount) or

"Rear" (DIN rear-mount installation, utilizing

threaded screw holes at the sides of unit chas-

sis). For details, refer to the following installa-

tion methods.

DIN Front-mount

Installation with the rubber bush

% Install the unit into the dashboard.

After inserting the holder into the dashboard,

then select the appropriate tabs according to

the thickness of the dashboard material and

bend them. (Install as firmly as possible using

the top and bottom tabs. To secure, bend the

tabs 90 degrees.)

60°

Removing the unit

Extend top and bottom of the trim ring out-

wards to remove the trim ring. (When reattach-

ing the trim ring, point the side with a groove

downwards and attach it.)

Holder

Dashboard

Remove the trim ring.

! It becomes easy to remove the trim ring if

the front panel is released.

Trim ring

Rubber bush

Screw