Pioneer MVH-X360BT Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para Receptor para automóvil Pioneer MVH-X360BT. Pioneer MVH-X360BT 26 páginas.
También para Pioneer MVH-X360BT: Manual de servicio (46 páginas)

Imprimir página

Section

Using this unit

APP CONN. SET (APP connect mode setting)

Select an appropriate option for your connected

device.

1 Press M.C. to select the desired setting.

WIRED (for iPhone)—BLUETOOTH (for smart-

phone)

! This setting is not available when the source is

set to PANDORA or APP.

About MIXTRAX

MIXTRAX technology is used to insert a variety

of sound effects in between songs, allowing you

to experience your music as a nonstop mix com-

plete with visual effects.

Notes

! Depending on the file/song, sound effects

may not be available.

! Turn MIXTRAX off if the visual effects it pro-

duces have adverse effects on driving. Refer

to Operations using the MIXTRAX button on

page 6.

MIXTRAX menu

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select MIXTRAX.

Turn M.C. to select the MIXTRAX func-

tion.

Once selected, the following MIXTRAX functions

can be adjusted. The function is enabled when

MIXTRAX is on.

SHORT MODE (short playback mode)

You can select the length of the playback time.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

1.0 MIN (1.0 minute)—1.5 MIN (1.5 minutes)—

2.0 MIN (2.0 minutes)—2.5 MIN (2.5 minutes)

—3.0 MIN (3.0 minutes)—OFF (off)

MIX PATTERN (mix pattern)

The MIXTRAX special effects display changes with

changes in the audio level.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

! SOUND LEVEL – The mix pattern changes

according to the sound level.

! LOW PASS – The mix pattern changes ac-

cording to the bass level.

! RANDOM – The mix pattern changes ran-

domly according to the sound level mode

and low pass mode.

DISP FX (display effect)

The MIXTRAX special effects display can be turned

on or off.

1 Press M.C. to select the desired setting.

ON (MIXTRAX special effects display)—OFF

(normal display)

CUT IN FX (manual cut-in effect)

You can turn on or off the MIXTRAX sound effects

while manually changing tracks.

1 Press M.C. to select the desired setting.

ON (on)—OFF (off)

Initial menu

Press and hold SRC/OFF until the unit

turns off.

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select INITIAL.

Turn M.C. to select the initial menu func-

tion.

Once selected, the initial menu function below

can be adjusted.

Using this unit

SP-P/O MODE (rear output and preout setting)

The rear speaker leads output and the RCA output

of this unit can be used to connect a full-range

speaker or subwoofer. Select a suitable option for

your connection.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

! REAR/SUB.W – Select when there is a full-

range speaker connected to the rear speak-

er leads output and there is a subwoofer

connected to the RCA output.

! SUB.W/SUB.W – Select when there is a

subwoofer connected directly to the rear

speaker leads output without any auxiliary

amp and there is a subwoofer connected

to the RCA output.

! REAR/REAR – Select when there is a full-

range speaker connected to the rear speak-

er leads output and the RCA output.

If there is a full-range speaker connected to

the rear speaker leads output and the RCA

output is not used, you may select either

REAR/SUB.W or REAR/REAR.

S/W UPDATE (updating the software)

This function is used to update this unit with the

latest Bluetooth software. For about Bluetooth

software and updating, refer to our website.

! Never turn the unit off while the Bluetooth soft-

ware is being updated.

1 Press M.C. to start updating.

Follow the on-screen instructions to finish up-

dating the Bluetooth software.

System menu

Press and hold SRC/OFF until the unit

turns off.

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select SYSTEM.

Black plate (14,1)

Turn M.C. to select the system menu

function.

For details, refer to System menu on page 13.

Using an AUX source

Insert the stereo mini plug into the AUX

input jack.

Press SRC/OFF to select AUX as the

source.

Note

AUX cannot be selected unless the auxiliary set-

ting is turned on. For more details, refer to AUX

(auxiliary input) on page 13.

Switching the display

Selecting the desired text information

1 Press DISP to cycle between the following:

! Source name

! Source name and clock

If an unwanted display appears

Turn off the unwanted display using the proce-

dures listed below.

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select SYSTEM.

Turn M.C. to display DEMO OFF and press

to select.

Turn M.C. to switch to YES.

Press M.C. to select.

<QRD3221-B>14