Pioneer MVH-X460UI Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Receptor para automóvil Pioneer MVH-X460UI. Pioneer MVH-X460UI 41 páginas. Digital media receiver

Imprimir página

Section

Using this unit

DISP COLOR (display section color setting)

You can select the desired colors for the display of

this unit.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the illumination color.

! Preset colors (ranging from WHITE to

BLUE)

! SCAN (cycle through a variety of colors au-

tomatically)

! CUSTOM (customized illumination color)

BOTH COLOR (key and display color setting)

You can select the desired colors for the keys and

display of this unit.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the illumination color.

! Preset colors (ranging from WHITE to

BLUE)

! SCAN (cycle through a variety of colors au-

tomatically)

ILLUMI FX (illumination effect mode)

When this mode is enabled, an illumination effect

with lights that slowly fade in and out in a set pat-

tern will appear on the display and keys to signify

changes.

1 Press M.C. to turn ILLUMI FX on or off.

! The illumination effect will flash momentarily

when the ignition is turned ON/OFF, regardless

of whether the ILLUMI FX setting is on or off.

Notes

! When CUSTOM is selected, the customized

color saved is selected.

! CUSTOM can be set separately from the

DIMMER on/off setting.

Customizing the illumination color

You can create custom illumination colors for

both KEY COLOR and DISP COLOR.

Press M.C. to display the main menu.

Turn M.C. to display ILLUMI and press to

select.

Turn M.C. to display KEY COLOR or

DISP COLOR. Press to select.

Press M.C. and hold until the customizing

illumination color setting appears in the dis-

play.

Press M.C. to select the primary color.

R (red)—G (green)—B (blue)

Turn M.C. to adjust the brightness level.

Adjustment range: 0 to 60

# You cannot select a level below 20 for all three of

R (red), G (green), and B (blue) at the same time.

# You can also perform the same operation on

other colors.

Note

You cannot create a custom illumination color

while SCAN is selected.

About MIXTRAX

MIXTRAX technology is used to insert a variety

of sound effects in between songs, allowing you

to experience your music as a nonstop mix com-

plete with visual effects.

Notes

! Depending on the file/song, sound effects

may not be available.

! Turn MIXTRAX off if the visual effects it pro-

duces have adverse effects on driving. Refer

to Operations using the MIXTRAX button on

page 6.

MIXTRAX menu

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select MIXTRAX.

Using this unit

Turn M.C. to select the MIXTRAX func-

tion.

Once selected, the following MIXTRAX functions

can be adjusted. The function is enabled when

MIXTRAX is on.

SHORT PLAYBCK (short playback mode)

You can select the length of the playback time.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

1.0 MIN (1.0 minute)—1.5 MIN (1.5 minutes)—

2.0 MIN (2.0 minutes)—2.5 MIN (2.5 minutes)

—3.0 MIN (3.0 minutes)—OFF (off)

FLASH AREA (flash area)

You can select areas for flashing colors.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

KEY/DISPLAY (key and display)—KEY (key)—

OFF (off)

! When OFF is selected, the color set under IL-

LUMI is used as the display color.

FLASH PATTERN (flash pattern)

The flashing color and MIXTRAX special effects

display change with changes in the sound and

bass levels.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

! SOUND LEVEL 1 to SOUND LEVEL 6 – The

flash pattern changes according to the

sound level. Select a desired mode.

! LOW PASS 1 to LOW PASS 6 – The flash

pattern changes according to the bass

level. Select a desired mode.

! RANDOM 1 – The flash pattern changes

randomly according to the sound level

mode and low pass mode.

! RANDOM 2 – The flash pattern changes

randomly according to the sound level

mode.

! RANDOM 3 – The flash pattern changes

randomly according to the low pass mode.

DISPLAY FX (display effect)

The MIXTRAX special effects display can be turned

on or off.

1 Press M.C. to select the desired setting.

ON (MIXTRAX special effects display)—OFF

(normal display)

CUT IN FX (manual cut-in effect)

You can turn on or off the MIXTRAX sound effects

while manually changing tracks.

1 Press M.C. to select the desired setting.

ON (on)—OFF (off)

Initial menu

Press and hold SRC/OFF until the unit

turns off.

Press and hold SRC/OFF until the main

menu appears in the display.

Turn M.C. to change the menu option

and press to select INITIAL.

Turn M.C. to select the initial menu func-

tion.

Once selected, the following initial menu func-

tions can be adjusted.

FM STEP (FM tuning step)

1 Press M.C. to select the FM tuning step.

100 (100 kHz)—50 (50 kHz)