Pioneer Super Tuner IIID DEH-P6900UB Manual de instalación - Página 2

Navegue en línea o descargue pdf Manual de instalación para Receptor para automóvil Pioneer Super Tuner IIID DEH-P6900UB. Pioneer Super Tuner IIID DEH-P6900UB 4 páginas. Pioneer deh-p6900ub: install guide

Imprimir página
Connecting the Units
7 When not connecting a rear speaker lead to a Subwoofer
1.5 m (4 ft. 9 in.)
20 cm (7-7/8 in.)
USB cable
Connect the USB portable audio
player or USB memory (sold
separately).
Front output
Antenna jack
Subwoofer output
AUX jack (3.5 ø)
Use a stereo mini plug cable
to connect with auxiliary
equipment.
Wired remote input
Hard-wired remote control
adaptor can be connected (sold
separately).
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Mute lead on that equipment. If not, keep the Audio Mute lead free of any
connections.
Fuse (10 A)
Yellow
Connect to the constant 12 V supply terminal.
Fuse resistor
Red
Connect to terminal controlled by ignition switch (12 V DC).
Fuse resistor
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Perform these connections when
using the optional amplifier.
16 cm (6-1/4 in.)
Rear output
This product
Connect with RCA cables
IP-BUS input (Blue)
(sold separately)
Multi-CD player
IP-BUS cable
(sold separately)
System remote control
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
+
+
Front speaker
Front speaker
≠
≠
White
Gray
+
+
Front speaker
Front speaker
≠
≠
White/black
Gray/black
Left
Green
Violet
+
+
Rear speaker
Rear speaker
≠
≠
Green/black
Violet/black
+
+
Rear speaker
Rear speaker
≠
≠
+
+
Subwoofer
Subwoofer
≠
≠
7 When using a Subwoofer without using the optional amplifier
Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Mute lead on that equipment. If not, keep the Audio Mute lead free of any
connections.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Right
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
Note:
Change the initial setting of this unit (refer to the Operation
Manual). The subwoofer output of this unit is monaural.
1.5 m (4 ft. 9 in.)
20 cm (7-7/8 in.)
USB cable
Connect the USB portable audio
16 cm (6-1/4 in.)
player or USB memory (sold
separately).
Front output
Subwoofer output
This product
Antenna jack
IP-BUS input (Blue)
Subwoofer output
AUX jack (3.5 ø)
Multi-CD player
Use a stereo mini plug cable
IP-BUS cable
(sold separately)
to connect with auxiliary
equipment.
Wired remote input
Hard-wired remote control
adaptor can be connected (sold
separately).
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
Fuse (10 A)
+
Front speaker
Fuse resistor
≠
Left
Fuse resistor
+
Subwoofer (4 Ω)
≠
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Not used.
ENGLISH
White
Gray
+
Front speaker
≠
White/black
Gray/black
Right
Green
Violet
+
Subwoofer (4 Ω)
≠
Green/black
Violet/black
+
Green
Violet
Subwoofer
(4 Ω) × 2
≠
Green/black
Violet/black