Pioneer Super Tuner IIID+ AVH-P7800DVD Manual de instalación - Página 8
Navegue en línea o descargue pdf Manual de instalación para Receptor para automóvil Pioneer Super Tuner IIID+ AVH-P7800DVD. Pioneer Super Tuner IIID+ AVH-P7800DVD 42 páginas. Owner's manual
También para Pioneer Super Tuner IIID+ AVH-P7800DVD: Manual de instalación (38 páginas), Manual del usuario (34 páginas)
Imprimir página
Connecting the Units
Connecting the power cord (2)
WARNING:
• If this unit is used with more than a 6-ch speaker system, be sure to connect the yellow
lead to the battery terminal directly. (See the section "Connecting the power cord (1)").
ISO connector
Note:
In some vehicles, the ISO connector
may be divided into two. In this case,
be sure to connect to both connectors.
The pin position of the ISO connector will
differ depends on the type of vehicle.
Connect 6* and 7* when Pin 5 is an antenna
control type. In another type of vehicle,
never connect 6* and 7*.
7
Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
Connect leads of the same
color to each other.
Cap (1*)
When not using this terminal, do
not remove the cap.
Yellow (3*)
Back-up (or accessory)
Red (5*)
Accessory (or back-up)
Blue/white (6*)
3*
5*
Yellow (2*)
To terminal always supplied with
power regardless of ignition switch position.
Red (4*)
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Blue/white (7*)
To Auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Blue/white
To system control terminal of the
power amp (max. 300 mA 12 V DC).
1*
2*
4*