Pioneer X-CM56 B Manual - Página 22

Navegue en línea o descargue pdf Manual para Receptor para automóvil Pioneer X-CM56 B. Pioneer X-CM56 B 35 páginas. Cd receiver system

Imprimir página

Using the tuner

Using the Auto Station program Memory

(ASPM)

Whilst in the ASPM operation mode, the tuner will

automatically search for new RDS stations. Up to 30 stations

can be stored.

If you have already stored some stations in memory, the

number of new stations you can store will be less.

Press TUNER until "FM" appears on the display.

Press MENU and then press

appears on the display.

Press ENTER and then press

appears on the display.

Press ENTER.

After "ASPM" has flashed for about 4 seconds, scanning will

start (87.5 - 108 MHz).

After scanning, the number of stations stored in memory will

be displayed for 4 seconds, and then "END" will appear for 4

seconds.

• To stop the ASPM operation before it is complete:

Press ∫ whilst it is scanning for stations. The stations

which are already stored in memory will be kept there.

• If the same station is broadcasting on different frequencies,

the strongest frequency will be stored in memory.

• Any station which has the same frequency as the one

stored in memory will not be stored.

• If 30 stations have already been stored in memory, the

scan will be aborted. If you want to redo the ASPM

operation, erase the preset memory.

• If no station have been stored in memory, "NOT

FOUND" will appear for about 5 seconds.

• If the RDS signals are very weak, station names may

not be stored in memory.

• The same station name can be stored in different

channels.

• In a certain area or during certain time periods, the

station names may temporarily be different.

until "FM RDS"

until "ASPM"

Note

• If any of the following events occur, it does not mean

that the unit is faulty:

- "PS", "NO PS" and a station name appear alternately,

and properly.

- If a particular station is not broadcasting properly or a

station is conducting tests, the RDS reception

function may not work properly.

- When you receive an RDS station whose signal is too

weak, information like the station name may not be

displayed.

- "NO PS", "NO PTY" or "NO RT" will flash for about 5

seconds, and then the frequency will be displayed.

• Notes for radio text:

- The first 8 characters of the radio text will appear and

then they will scroll across the display.

- If you tune in to an RDS station which is not

broadcasting any radio text, "NO RT" will be displayed

when you switch to the radio text position.

- Whilst radio text data is received or when the text

contents change, "RT" will be displayed.