Pioneer X-CM66D Manual de instrucciones - Página 24

Navegue en línea o descargue pdf Manual de instrucciones para Receptor para automóvil Pioneer X-CM66D. Pioneer X-CM66D 39 páginas. Cd receiver system

Imprimir página
Pioneer X-CM66D Manual de instrucciones
08
Using the tuner

Listening to the DAB+

About DAB+ (Digital Audio Broadcasting)

Digital Audio Broadcasting is a digital transmission system
where audio signals are converted to digital signals for
broadcasting. DAB+ is broadcast as a group of data called
multiplex (ensemble) which may contain one or more
stations (services). Each station contains a primary service
and there may be one or more secondary services. This
allows several programmes or services to be transmitted on
a single frequency.
DAB + SIGNAL

Tuning

1
Press the TUNER until "DAB" appears on
the display.
When turned on for the first time, the unit scans radio
stations automatically to create a station list.
The stations will be stored in alphanumeric order and the first
station on the list will be selected and you will hear it through
the speakers.
2
Press the TUNE +/– to select the desired
station.
3
Within 10 seconds, press the ENTER on
the remote control to tune into the desired
station.
• If no station is found, "NO SIGNAL" appears.
• Up to 100 appears for total received stations.
24
En
MULTIPLEX
(ENSEMBLE)
SERVICES
SERVICES
COMPONENTS
(STATIONS)
Auto Scan
You can make the auto scan again when you move the unit
to other areas or add multiplex channels to the station list.
1
Press the TUNER until "DAB" appears on the display.
2
Press MENU and then press / until "DAB SCAN"
appears on the display.
3
Press ENTER and then press / until "AUTO"
appears on the display.
4
Press ENTER.
Auto Scan scanning begins.
After the scanning process is complete, the first station that
was detected is selected.
Manual tune
You can manually store stations which Auto Scan cannot
find. If reception is poor, you can adjust the sensitivity.
Manual tune is only available after Auto tune. Perform Auto
Scan first.
1
Press the TUNER until "DAB" appears on the display.
2
Press MENU and then press / until "DAB SCAN"
appears on the display.
3
Press ENTER and then press / until "MANUAL"
appears on the display.
4
Press ENTER.
5
Within 10 seconds, press the TUNE +/– to select the
DAB+ frequency.
6
Within 10 seconds, press the ENTER.
• If the level is too low, move the aerial or unit to improve
reception.