Pioneer X-EM26 Manual de instrucciones - Página 16

Navegue en línea o descargue pdf Manual de instrucciones para Receptor para automóvil Pioneer X-EM26. Pioneer X-EM26 17 páginas. System
También para Pioneer X-EM26: Manual de instrucciones (28 páginas)

Imprimir página

 Clock/timer setting is erased.

 Power has been interrupted or the AC power cord has

been disconnected.

 Reset the clock/timer.

When the Bluetooth wireless technology device is

connected or operated (X-EM26 only)

 The Bluetooth wireless technology device cannot be

connected or operated.

Sound from the Bluetooth wireless technology device

is not emitted or the sound is interrupted.

 Check that no object that emits electromagnetic

waves in the 2.4 GHz band (microwave oven, wireless

LAN device or Bluetooth wireless technology

apparatus) is near the unit. If such an object is near

the unit, set the unit far from it. Or, stop using the

object emitting the electromagnetic waves.

 Check that the Bluetooth wireless technology device

is not too far from the unit and that obstructions are

not set between the Bluetooth wireless technology

device and the unit. Set the Bluetooth wireless

technology device and the unit so that the distance

between them is less than about 10 m* and no

obstructions exist between them.

* The distance given is to be used as a rough guide. The

actual allowable distance between devices may vary

depending on conditions in the surrounding environment.

 The Bluetooth wireless technology device may not be

set to the communication mode supporting the

Bluetooth wireless technology. Check the setting of

the Bluetooth wireless technology device.

Cautions on use

∫ When moving this unit

When moving this unit, be sure to first check that there is no

disc loaded. Then press Í, wait until [STANDBY]

disappears on main display to turn off, and then unplug the

power cord. Damage may occur if the unit is transported or

moved with a disc inserted, or when another device is

connected to the USB terminal, or AUDIO IN mini-plug jack.

∫ Place of installation

• Choose a stable place near the TV or stereo system

being used with this unit.

• Do not place this unit on top of a TV or color monitor.

Also, install it away from cassette decks and other

devices easily affected by magnetic forces.

Avoid the following locations:

• Places exposed to direct sunlight

• Humid or poorly ventilated places

• Extremely hot places

• Places exposed to vibrations

• Places in which there is much dust or cigarette smoke

• Places exposed to soot, steam, or heat (kitchens, etc.)

∫ Do not place objects on this unit

Do not place any objects on top of this unit.

Do not obstruct the ventilation holes.

Do not use this unit on shaggy rugs, beds, sofas, etc., or

wrapped in cloth, etc. Doing so will prevent the heat from

dispersing, leading to damage.

Do not expose to heat.

Do not place this unit on top of an amplifier or other

components that generate heat. When rack mounting it, to

avoid the heat given off by the amplifier or other audio

components, place it on a shelf below the amplifier.

• Turn off the power of this unit when not using it.

• Depending on signal conditions, striped patterns may

appear on a TV screen and noise may enter the sound

of radio broadcasts when the power of this unit is on. If

this happens, turn off the power of this unit.

∫ Cleaning the product

• Unplug the power cord from the power outlet when

cleaning this unit.

• Clean this unit using a soft cloth. For tough dirt, apply

some neutral detergent diluted in 5 to 6 parts water to a

soft cloth, wring out thoroughly, wipe off the dirt, and

then wipe again with a soft, dry cloth.

• Alcohol, thinner, benzene, insecticides, etc., could

cause the print or paint to peel off. Also, leaving rubber

or vinyl products in contact with this unit for long periods

of time could mar the cabinet.

• When using chemical-impregnated wipes, etc., read the

cautions included with the wipes carefully.

∫ Cleaning the lens

• The lens of this unit should not become dirty in normal

use, but if for some reason it should malfunction due to

dust or dirt, consult your nearest Pioneer authorized

service center. Although lens cleaners for players are

commercially available, we advise against using them

since some may damage the lens.

Handling discs

∫ Storing

• Always place discs in their cases and store them

vertically, avoiding hot, humid places, places exposed

to direct sunlight and extremely cold places.

• Be sure to read the cautions included with the disc.

∫ Cleaning discs

• Discs may not play if there are fingerprints or dust on

them. In this case, use a cleaning cloth, etc., to gently

wipe the disc from the inside towards the outside. Do

not use dirty cleaning cloths.

• Do not use benzene, thinner or other volatile chemicals.

Also, do not use record spray or antistatic agents.

• For tough dirt, apply some water to a soft cloth, wring

out thoroughly, wipe off the dirt, and then wipe off the

moisture with a dry cloth.

• Do not use damaged (cracked or warped) discs.

• Do not let the signal surface of discs get scratched or dirty.

• Do not attach pieces of paper or stickers to discs. Doing

so could warp discs, making it impossible to play them.

Also, note that rental discs often have labels attached to

them, and the glue of the label may have oozed out.

Check that there is no glue around the edges of such

labels before using rented discs.