Pioneer XC-HM81-S Manual de instrucciones - Página 11
Navegue en línea o descargue pdf Manual de instrucciones para Receptor para automóvil Pioneer XC-HM81-S. Pioneer XC-HM81-S 42 páginas. Network cd receiver system
También para Pioneer XC-HM81-S: Manual de inicio rápido (33 páginas)
Imprimir página
3
3
Getting started
Setting the receiver
When you use the receiver for the first time, the following
screens will be displayed.
Set up the following items to customize the receiver.
1
Press STANDBY/ON.
The power indicator flashes slowly. About twenty seconds
after turning on the power, the following screen appears.
About thirty seconds are required between turning the
power on and completion of startup.
Auto power off setup
Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours).
•
Default setting: 6 H
1
Press NETWORK, then press SETUP on the remote
control.
The Initial Setup menu is shown on the display.
2
Select 'Option Setting' from Initial Setup menu.
3
Select 'Auto Power Off' from Option Setting menu.
4
Use / to specify the amount of time to allow before
the power is turned off (when there has been no
operation), then press ENTER.
You can select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
5
When you're finished, press RETURN.
Setting the clock
TOP
MENU
STANDBY/ON
OPEN/CLOSE
NET STANDBY
TIMER
SLEEP
iPod
USB
CD
SOUND
SETUP
Setting the clock allows you to use the timer.
1
Press TIMER button on the remote control.
The day of the week and time are displayed.
The first time you use the clock, you are taken to the clock
adjust mode.
2
Press ENTER button.
3
Use / to set the day of the week, then press ENTER.
4
Use / to select 24-hour or 12-hour display, then
press ENTER.
The 24-hour display will appear.
(00:00 - 23:59)
The 12-hour display will appear.
(AM 00:00 - PM 11:59)
5
Use / to set the hour, then press ENTER.
6
Use / to set the minute, then press ENTER to
confirm.
To confirm the time display:
Press TIMER button. The time display will appear for about 10
seconds.
Setting the wake-up timer
TOP
MENU
STANDBY/ON
OPEN/CLOSE
NET STANDBY
TIMER
SLEEP
CD
iPod
USB
SOUND
SETUP
Timer playback:
The receiver turns on and plays the desired source (CD, AM,
FM, USB, Internet Radio, AUDIO IN, LINE or iPod) at a
iPod
preset time.
VOLUME
CONTROL
Before setting timer:
•
Check that the clock is set to the correct time (Setting the
ENTER
clock on page 11). If it is not set, you cannot use the timer
function.
RETURN
•
For timer playback: Plug in USB or load discs or iPod to be
played.
1
Press STANDBY/ON button to turn the power on.
2
Press and hold TIMER button for more than two
seconds.
3
Use / to select 'Timer Set' within ten seconds, then
press ENTER.
4
Select the source you want to play.
Use / to select CD, TUNER, USB, Internet Radio,
AUDIO IN, LINE or iPod function.
5
Press ENTER.
6
Set the day(s) of the week.
Use / to choose the day(s).
The timer can be set as follows.
EVERYDAY
TUESDAY
FRIDAY
TUE-SAT
7
Press ENTER.
8
Set the switch-on time.
Use / to set the hour, then press ENTER.
Set the minute in the same way, pressing ENTER when
you're done.
iPod
VOLUME
CONTROL
9
Set the switch-off time.
Set as above, pressing ENTER when done.
ENTER
RETURN
SUNDAY
MONDAY
WEDNESDAY
THURSDAY
SATURDAY
MON-FRI
SAT-SUN
11