Pioneer DEH-X7800DAB Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Receptor Pioneer DEH-X7800DAB. Pioneer DEH-X7800DAB 28 páginas.

Imprimir página

WARNING

Do not use the unit in standard mode when a speaker system for network mode is connected to the

unit. Do not use the unit in network mode when a speaker system for standard mode is connected to

the unit. This may cause damage to the speakers.

Turn the M.C. dial to select the options, then press to confirm.

To proceed to the next menu option, you need to confirm your selection.

Menu Item

Description

LANGUAGE

Select the language to display the text information from a

compressed audio file.

[ENG](English),

[РУС](Russian),

[TUR](Turkish)

CLOCK SET

Set the clock.

1 Turn the M.C. dial to adjust the hour, then press to confirm.

The indicator moves to the minute setting automatically.

2 Turn the M.C. dial to adjust the minute, then press to confirm.

FM STEP

Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

DAB ANT PW

Supply power to a DAB antenna. Select this when using the

optional DAB antenna (AN-DAB1, sold separately) with the unit.

[ON]

[OFF]

No power is supplied to a DAB antenna. Select this when using a

passive antenna with no booster.

SPEAKER MODE

Switch between two operation modes: the 2-way network mode

(NETWORK) and the standard mode (STANDARD) according to

[STANDARD],

the connections you have established. For details on operation

[NETWORK]

modes, see page 14.

After selecting the appropriate mode, turn the M.C. dial to

select [YES], then press to confirm.

• You cannot complete the setup menu without setting the

[SPEAKER MODE].

• Once the speaker mode is set, this setting cannot be changed

unless the default settings of this product are restored. Restore

the default settings to change the speaker mode setting (refer

to SYSTEM RESET on page 6).

[QUIT :YES] appears when all the settings have been made.

To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO],

then press to confirm.

Press the M.C. dial to confirm the settings.

When [DAB ANT PW] is set to [ON], [UPDATING LIST] appears in the display and the

service list will be updated.

NOTE

These settings other than [SPEAKER MODE] can be made at any time from the SYSTEM settings

(page 17) and INITIAL settings (page 5).

Canceling the demonstration display (DEMO OFF)

Press the M.C. dial to display the main menu.

Turn the M.C. dial to select [SYSTEM], then press to confirm.

Turn the M.C. dial to select [DEMO OFF], then press to confirm.

Turn the M.C. dial to select [YES], then press to confirm.

INITIAL settings

Press and hold SRC/OFF until the unit turns off.

Press and hold SRC/OFF to display the main menu.

Turn the M.C. dial to select [INITIAL], then press to confirm.

Turn the M.C. dial to select an option, then press to confirm.

NOTE

The options vary depending on the unit.

Menu Item

FM STEP

[100], [50]

REAR-SP

[FUL]

[SW]

SYSTEM UPDATE

[SYSTEM INFO], [S/

W UPDATE]

Autogoods "130"

Description

Select the FM tuning step from 100 kHz or 50 kHz.

Select when there is a full-range speaker connected to the rear

speaker output leads.

Select when there is a subwoofer connected directly to the rear

speaker output leads without any auxiliary amplifier.

Select [SYSTEM INFO] to confirm the latest system information

on the unit.

Select [S/W UPDATE] to update the unit to the latest software

and initialize the unit settings. For details on the latest software

and updating, visit our website.