Pioneer VSX-604S Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Receptor estéreo Pioneer VSX-604S. Pioneer VSX-604S 34 páginas.

Imprimir página

REAR PANEL FACILITIES

(Multi-voltage model only)

See page 4.

PHONO input jacks

Connect to the output cables from a turntable.

@ GND terminal

Connect the turntable ground lead to this terminal.

TAPE 2 MONITOR jacks

Connect to audio components such as a second cassette

deck or a graphic equalizer.

©) CD input jacks

Connect to the output jacks of a compact disc player.

@ LD input jacks

Connect to an LD player's output jacks (audio, video).

(3 TAPE 1/VCR jacks

Connect to the first cassette deck ora

VCR. With a VCR,

also connect the video jacks.

CHANNEL STEP switch

(Multi-voltage model only)

See page 4.

d5 SUB WOOFER PRE OUT jack

If you want to boost the low frequencies, connect to a

subwoofer power amplifier.

REAR SPEAKERS terminals

Connect the rear speakers to these terminals.

NOTES:

¢ Donot allow any of the cord's conductors to protrude from the

terminals or touch any other conductors.

Malfunctions or

breakdowns may occur when conductors come into contact with

each other. Use rear speakers with an impedance of 8 22 to 16.Q.

° Besure to connect two speakers (L, R). There will be no sound if

only one speaker is connected.

@ CENTER SPEAKER terminals

Connect the center speaker to these terminals.

NOTE:

Do not allow any of the cord's conductors to protrude from the

terminals or touch any other conductors. Malfunctions or breakdowns

may occur when conductors come into contact with each other. Use

a center speaker with an impedance of 8 Q to 16 Q.

78 FRONT SPEAKERS terminals

A_ :Connect to the first set of speakers.

B_ :Connect to the second set of speakers.

NOTE:

Do not allow any of the cord's conductors to protrude from the

terminals or touch any other conductors. Malfunctions or breakdowns

may occur when conductors come into contact with each other. Use

front speakers with an impedance of

8Qto 162.

Power cord

@ AC OUTLET

(U.S. and Canadian models)

(SWITCHED 100 W (0.8 A) MAX)

Power supplied through this outlet is turned on and off by the

receiver's POWER switch. Total electrical power consumption of

connected equipment should not exceed 100 W (0.8 A).

(Multi-voltage model)

(SWITCHED 100 W MAX)

Power supplied through this outlet is turned on and off by the

receiver's POWER switch. Total electrical power consumption of

connected equipment should not exceed 100 W.

NOTES:

¢ This unit should be disconnected by removing the power plug from

the wall socket when not in regular use, e.g. when on vacation.

* Donot connect appliances with high power consumption such as

heaters, irons, or television sets to this AC OUTLET in order to

avoid overheating and fire risk. This can cause the receiver to

malfunction.

CAUTION:

DO NOT CONNECT MONITOR OR TV SET.