Pioneer A-676 Manual de instrucciones - Página 15
Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Pioneer A-676. Pioneer A-676 16 páginas. Stereo amplifier
También para Pioneer A-676: Manual de instrucciones (17 páginas), Manual de instrucciones (32 páginas)
Imprimir página
SPECIFICATIONS
[A-676]
Continuous power output (both channels driven at 20 Hz to 20 kHz)"
T.H.D. 0.007 %, 8 n
70 W + 70 W'
T.H.D. 0.009 %, 4 n
95 W + 95 W'
DIN Continuous power output (both channels driven at 1 kHz)
T.H.D. 1.0 %,8
n
80 W + 80 W
T.H.D. 1.0 %, 4 n
120 W + 120 W
Power bandwidth
0.05%,
8 n
5 Hz -
80 kHz'
Damping factor
(1 kHz/20 Hz to 20 kHz). 8 n
150/70
Dynamic power output (on EIA dynamic test signal)
4 n/2 n
:
150 W/200 W
Total harmonic distortion"
20 Hz to 20 kHz, 70 W, 8 n
0.007 %'
20 Hz to 20 kHz, 95 W, 4 n
0.009 %'
Inter-modulation
distortion (at rated output)
0.007 %'
• Above specifications
are for when power supply is 230 V.
Input sensitivity/impedance
PHONO (MM)
2.5 mV/50 kn
PHONO (MC)
0.2 mV/100 n
CD, TUNER, LINE, TAPE
150 mV/50 kn
PHONO overload level
.~
1 kHz, T.H.D. 0.008 % (MM/MC)
/ .. : 200 mV/19 mV
Output level/impedance
TAPE REC, ADAPTOR OUTPUT
150 mV/2.2 kn
Frequency response
PHONO (MM), 20 Hz to 20 kHz
±
0.2 dS
PHONO (MC). 20 Hz to 20 kHz
±
0.3 dS
CD, TUNER. LINE, TAPE, 1 Hz to 150 kHz
:':~ dS'
Tone control (volume control set at - 40 dS position)
SASS
±
8 dS (100 Hz)
TRESLE
±
8 dS (10kHz)
Loudness contour (volume control set at - 40 dS position)
............................................
+5 dS (100 Hz)/+3
dS (10 kHz)
Filter (SUSSONIC)
17 Hz (12 dS/oct.)
Signal-to-Noise ratio (IHF short circuit, A network)
PHONO (MM, 5 mV input/MC,
0.5 mV input)
94 dS/76 dS'
CD, TUNER. LINE, TAPE
110 dS'
Signal-to-Noise ratio (DIN, continuous power/50
mW)
PHONO (MM)
74 dS/65 dS'
CD, TUNER, LINE, TAPE
92 dS/68 dS'
Power Supply/Miscellaneous
Power requirements
a.c. 220 -
230 Volts-,
50/60 Hz
Power Consumption
650 W
Dimensions
420 (W) x 435 (D) x 162 (H) mm
Weight (without package)
12.8 kg
Accessories
Operating instructions
1
NOTE:
Specifications
and design subject to possible modification
without
notice, due to improvements.
,
When the DIRECT button to ON.
•• Measured by Audio Spectrum Analyzer.
28
<ARE1194>
[A-777]
Continuous power output (both channels driven at 20 Hz to 20 kHz)"
T.H.D. 0.007 %, 8 n
95 W + 95 W'
T.H.D. 0.009 %, 4 n
140 W + 140 W'
DIN Continuous power output (both channels driven at 1 kHz)
T.H.D. 1.0 %, 8 n
100 W + 100 W
T.H.D. 1.0 %, 4 n
150 W + 150 W
Power bandwidth
0.05%,8
n
5 Hz - 80 kHz'
Damping factor
(1 kHz/20 Hz to 20 kHz). 8 n
150/70
Dynamic power output (on EIA dynamic test signal)
4 nl2 n
220 W/350 W
Total harmonic distortion"
20 Hz to 20 kHz, 95 W, 8 n
0.007 %'
20 Hz to 20 kHz, 140 W, 4 n
0.009 %'
Inter-modulation
distortion (at rated output)
0.007 %'
• Above specifications
are for when power supply is 230 V.
Input sensitivity/impedance
PHONO (MM)
2.5 mV/50 kn
PHONO (MC)
0.2 mV/100 n
CD, TUNER, LINE, TAPE
150 mV/50 kn
PHONO overload level
1 kHz, T.H.D. 0.008 % (MM/MC)
200 mV/19 mV
Output level/impedance
TAPE REC, ADAPTOR OUTPUT
150 mV/2.2 kn
Frequency response
PHONO (MM). 20 Hz to 20 kHz
±
0.2 dS
PHONO (MC). 20 Hz to 20 kHz..
±
0.3 dS
CD, TUNER, LINE, TAPE, 1 Hz to 150 kHz
:':~ dS'
Tone control (volume control set at - 40 dS position)
SASS
±
8 dS (100 Hz)
TRESLE
±
8 dS (10 kHz)
MUTING
-
00
Loudness contour (volume control set at - 40 dS position)
............................................
+5 dS (100 Hz)/+3
dS (10 kHz)
Filter (SUSSONIC)
17 Hz (12 dS/oct.)
Signal-to-Noise ratio (lHF short circuit, A network)
PHONO (MM, 5 mV input/MC,
0.5 mV input)
94 dS/76 dS'
CD, TUNER. LINE, TAPE
110 dS'
Signal-to-Noise ratio (DIN, continuous
power/50
mW)
PHONO (MM)
74 dS/68 dS'
CD, TUNER, LINE, TAPE
92 dS/70 dS'
Power Supply/Miscellaneous
Power requirements
a.c. 220 - 230 Volts - , 50/60 Hz
Power Consumption
820 W
Dimensions
420 (W) x 435 (D) x 162 (H) mm
Weight (without package)
19.0 kg
Accessories
Operating instructions
1
Cushion spacer set
1
NOTE:
Specifications
and design subject to possible modification
without
notice, due to improvements .
,
When the DIRECT button to ON.
"
Measured by Audio Spectrum Analyzer.
Published by Pioneer Electronic Corporation.
Copyright © 1991 Pioneer Electronic Corporation.
All rights reserved.