Ariston ARXF 125 S Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Lavadora Ariston ARXF 125 S. Ariston ARXF 125 S 48 páginas.
También para Ariston ARXF 125 S: Manual de instrucciones (13 páginas), Manual de instrucciones (24 páginas)

Imprimir página

Indicator lights

The indicator lights provide important information.

This is what they can tell you:

Wash cycle phase indicator lights

As the WASH CYCLE knob is rotated, the indicator

lights illuminate, indicating the stages which will be

performed by the machine in accordance with the

selected wash cycle.

Once the desired wash cycle has been selected and

has begun, the indicator lights switch on one by one

to indicate which phase of the cycle is currently in

progress.

Wash

Rinse

Spin

Drain no spin

End of wash cycle

Function buttons and corresponding indicator

lights

When a function is selected, the corresponding

indicator light will illuminate.

If the selected function is not compatible with the

programmed wash cycle, the corresponding indicator

light will flash, a sound signal will be emitted and the

function will not be activated.

If a function which is incompatible with another

function selected previously, only the most recent

selection will remain active.

Starting a wash cycle

1. Turn the washing machine on by pressing the ON/OFF button. All the indicator lights will turn on for a few

seconds, then only the indicator lights relative to the selected programme settings will remain lit and the START/

PAUSE indicator light will flash.

2. Load the laundry and close the door.

3. Set the WASH CYCLE knob to the desired programme.

4. Set the washing temperature (see "Personalisation").

5. Set the spin speed (see "Personalisation").

6. Measure out the detergent and washing additives (see "Detergents and laundry").

7. Select the desired functions.

8. Start the wash cycle by pressing the START/PAUSE button and the corresponding indicator light will remain lit

in a fixed manner, in green. To cancel the set wash cycle, pause the machine by pressing the START/PAUSE

button and select a new cycle.

9. At the end of the wash cycle the

off, indicating that the door may be opened. Take out your laundry and leave the appliance door ajar to make

sure the drum dries completely. Switch the washing machine off by pressing the ON/OFF button.

Temperature indicator light

When a temperature value is selected, the

corresponding indicator light will illuminate.

Spin indicator light

When a spin value is selected, the corresponding

indicator light will illuminate.

Control panel lock indicator light

To activate the control panel lock, press and hold the

button for approximately 2 seconds. When the

indicator light is illuminated, the control panel is

locked. This means it is possible to prevent wash

cycles from being modified accidentally, especially

where there are children in the home.

To deactivate the control panel lock, press and hold

the button for approximately 2 seconds.

Door locked indicator light

If this indicator light is on, the appliance door is locked

to prevent it from being opened accidentally; to avoid

any damage, wait for the indicator light to switch off

before you open the appliance door.

N.B. If the DELAY TIMER function is activated, the door

cannot be opened; pause the machine by pressing the

START/PAUSE button if you wish to open it.

If the START/PAUSE indicator light (orange) flashes

rapidly at the same time as the function indicator

light, this indicates a problem has occurred (see

"Troubleshooting").

indicator light will switch on. The DOOR LOCKED indicator light will switch