Pioneer DC-Z85 Manual de instrucciones - Página 18
Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Pioneer DC-Z85. Pioneer DC-Z85 28 páginas. Stereo double cassette deck amplifier / fm/am digital synthesizer tuner / stereo turntable
Imprimir página
SOUND CONTROL
Programming
your own
sound
quality settings
into memory
You can program up to five of your original sound quality settings
into memory.
Using the memory
5
Sess
>
VIVID BOUND MILD
noanae
ABC
OE
"tk 24k "bx
1k 'SHARP
'WARM
a 150 400 tk
1. Adjusting to achieve your desired sound
2. Press the MEMORY button.
© The bars under the A to E indicators light in sequence.
3. Press the memory recall button (A to E) you want to use for
programming.
@ The bar under the pressed button's indicator (A to E} lights.
4, Repeat procedures 1 to 3 to program into memory with other
memory recall buttons.
Recalling settings from memory
1. Press the PRESET/PGM
button, and select PROGRAM.
® The PROGRAM indicator in the display section lights.
2. Press the memory recall button for the memorized setting
that you wish to recall.
© The bar under the pressed memory recall button's indicator (A
to E) lights.
18
<ARBI354>
[MEMORIZING
YOUR
USUAL
LIS- |
| TENING SETTINGS (SMART OPER-
| ATION) ©
This function lets your
tings (usual oper
ation switch and knob settings} at the push ofa
uttor
Press the START/SET
butten,
and the
unit searches for an audio
source thatis
ready to play, and
automatically switches functions be-
fore starting p!
from that source.
With PD-Z85M, put CDs in trays 1 and 2
Operation
1. Press the SMART OPERATION START/SET button.
ACD starts playing.
When no disc is loaded
1
Playback of the tape in Deck | begins.
When there is no tape loaded in Deck | .....
t
Playback of the tape in Deck II begins.
When there is no tape loaded in Deck It...
1
Sound from the tuner is output,
If the TUNED indicator does not light at the received
frequency .
i
The function becomes CD
Programming the setting
~
_
Select the appropriate settings to be stored.
2. Press the MEMORY button.
® The SMART OPERATION indicator will blink.
3. Press the START/SET button within 5 seconds.
4. The SMART OPERATION indicator will go off,
NOTE:
Volume will be memorized at the setting that exists when mémoriza-
tion takes placed. However,
high valume settings above or near the
center position can not be
mermarized.
Recalling the me
1. Set to play back from the source you want to listen to
elf you have memorized
Tape in SMART
OPERATION,
load a
tape.
® if you have memorized CD, load a CD in the CD tray
2. Press the START/SET button.
© The SMART OPERATION indicator will blink
¢ When playback with a memorized function is net possible tor
example, when CD has been memorized and there
i s no CD in
the tray), search for the
next audio source and operate ma
nually in the same way
as before pragramming the memory.
NOTE:
When playback tr
not possible, swite
n the sour
the function
a stored function (inpul selector] is
as follows
Stored function
Switching order
TAPE > TUNER CD
cD
TAPE
AS = CD — TUNER
— CO
TUNER
TUNER => CD + TAPE — Cl