Pioneer GM-DX874 Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Amplificador Pioneer GM-DX874. Pioneer GM-DX874 16 páginas. Bridgeable four-channel power amplifier
También para Pioneer GM-DX874: Manual de servicio (17 páginas), Manual del usuario (16 páginas)

Imprimir página

1. Connecting the Units

Connecting the units

Connecting the speaker output

terminals

Use wire cutters or a utility knife to

strip the end of the speaker wires to ex-

pose about 10 mm (3/8 in.) of wire and

then twist the wire.

Connect the speaker wires to the

speaker output terminals.

Fix the wires securely with the terminal

screws.

1 Terminal screws

2 Speaker wires

3 Speaker output terminals

Twist

10 mm (3/8 in.)

Installation

Before installing the amplifier

WARNING

To ensure proper installation, use the supplied

parts in the manner specified. If any parts

other than those supplied are used, they may

damage internal parts of the amplifier, or be-

come loose causing the amplifier to shut

down.

Do not install in:

Places where it could injure the driver or

passengers if the vehicle stops suddenly.

Places where it may interfere with the dri-

ver, such as on the floor in front of the dri-

ver s seat.

Install tapping screws in such a way that the

screw tip does not touch any wire. This is im-

portant to prevent wires from being cut by vi-

bration of the car, which can result in fire.

Make sure that wires do not get caught in the

sliding mechanism of the seats or touch the

legs of a person in the vehicle as short-circuit

may result.

When drilling to install the amplifier, always

confirm no parts are behind the panel and

protect all cables and important equipment

(e.g. fuel/brake lines, wiring) from damage.

CAUTION

To ensure proper heat dissipation of the ampli-

fier, ensure the following during installation:

Allow adequate space above the amplifier

for proper ventilation.

Do not cover the amplifier with a floor mat

or carpet.

Place all cables away from hot places, such

as near the heater outlet.

The optimal installation location differs de-

pending on the car model. Secure the ampli-

fier at a sufficiently rigid location.

Check all connections and systems before

final installation.

After installing the amplifier, confirm that the

spare tire, jack and tools can be easily re-

moved.