Pioneer RS-A99 Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Amplificador Pioneer RS-A99. Pioneer RS-A99 16 páginas. Optical digital reference system bridgeable four-channel power amplifier

Imprimir página

1. Specifications

Installation

Before installing the amplifier

WARNING

! Do not use unauthorized parts as this may

cause malfunctions.

! Do not install this unit where:

— it may interfere with operation of the vehi-

cle.

— it may cause injury to a passenger as a re-

sult of a sudden stop.

! Install tapping screws in such a way that the

screw tip does not touch any wire. This is im-

portant to prevent wires from being cut by vi-

bration of the car, which can result in fire.

! Place all cables away from moving parts, such

as the gear shift and seat rails.

! When drilling to install the amplifier, always

confirm no parts are behind the panel and

protect all cables and important equipment (e.

g. fuel/brake lines, wiring) from damage.

CAUTION

! To ensure proper heat dissipation of the ampli-

fier, ensure the following during installation:

— Allow adequate space above the amplifier

for proper ventilation.

— Do not cover the amplifier with a floor mat

or carpet.

! Place all cables away from hot places, such

as near the heater outlet.

! The optimal installation location differs de-

pending on the car model. Secure the ampli-

fier at a sufficiently rigid location.

! Check all connections and systems before

final installation.

! After installing the amplifier, confirm that the

spare tire, jack and tools can be easily re-

moved.

Example of installation on

the floor mat or chassis

Place the amplifier in the desired instal-

lation location.

Insert the supplied tapping screws (5 mm ×

25 mm) into the screw holes and push on the

screws with a screwdriver so they make an im-

print where the installation holes are to be lo-

cated.

Install the unit.

1 Tapping screws (5 mm × 25 mm)

2 Car mat or chassis

3 Drill a 3-mm to 3.5-mm hole

Section