Pioneer SA-6300 Manual de instrucciones - Página 7
Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Pioneer SA-6300. Pioneer SA-6300 13 páginas. Integrated stereo amplifier
También para Pioneer SA-6300: Manual de instrucciones (13 páginas)
FUNCTION
Switch
Switch for selecting desired program source.
PHONO:
To play record on turntable connected to the
PHONO jacks
_ TUNER:
To
employ
tuner
connected
to the TUNER
jacks
AUX:
To employ program
source
connected to the
AUX jacks.
—————~— VOLUME
Control
Control
for adjusting volume from es
and head-
phones. Clockwise rotation increases volume.
LOUDNESS
Switch
Set switch to ON to enhance low and high frequencies
when listening at low volume.
The human ear possesses differing response to sound at
high and low volume levels. This switch compensates for
these characteristics.
Before setting the POWER
switch to ON, set t the
other controls and switches as follows:
@e VOLUME
control to MIN.
.
SPEAKERS switch to the desired position.
_ Now you can turn the POWER switch ON.
OPERATION
PLAYING RECORDS
1. Set the FUNCTION switch to PHONO.
2. Play record on the turntable.
3. Adjust
the
VOLUME,
BASS
and
TREBLE
controls for desired volume and tone.
NOTES -
e
Lower the tonearm stylus gently onto the record. Temporarily
lowering the
VOLUME
control
will reduce the noise which
sometimes occurs when the tonearm touches down.
@ Do not turn off the power while the stylus is in contact with
the record.
® Avoid imparting vibration to the turntable while a record is
being played. This may cause the stylus to jump and possibly
damage the record.
@
Howling
may
be caused
if the turntable is too close to the
speaker systems. Allow for adequate spacing when installing.
EMPLOYING TUNER
1. Set the FUNCTION switch to TUNER.
2. Tune in the desired station on the tuner.
3. Adjust the VOLUME, BASS & TREBLE controls
for desired volume and tone.
EMPLOYING AUX COMPONENTS
jacks.
1. Set the FUNCTION switch to AUX.
2. Operate the program source.
3. Adjust the VOLUME, BASS & TREBLE controls
for desired volume and tone.