Pioneer VSX-456 Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Pioneer VSX-456. Pioneer VSX-456 29 páginas. Audio/ video stereo receiver
También para Pioneer VSX-456: Manual de instrucciones (28 páginas)

Imprimir página

Thank you for buying this Pioneer product.

Please read through these operating instructions so you

will know how to operate your model properly. After you

have finished reading the instructions, put them away in

a safe place for future reference.

In some countries or regions, the shape of the power plug

and power outlet may sometimes differ from that shown

in the explanatory drawings.

However the method of con-

necting and operating the unit is the same.

IMPORTANT NOTICE

[For U.S. model]

The serialnumber

for this equipmentis located on the rear

panel. Please write this serial number on your enclosed

warranty card and keep it in a secure place. This is for your

security.

THE POWER

SWITCH IS SECONDARY

CONNECTED

AND THEREFORE

DOES NOT SEPARATE THE UNIT

FROM MAINS POWER IN STANDBY POSITION.

TWO VOLTAGE SELECTOR SWITCHES

Only the multi-voltage model is provided with

these switches. Mains voltages in Saudi Ara-

bia are 127 V and 220 V only. Never use this

model with the 110 V setting in Saudi Arabia.

The line voltage selector switches are on the rear panel.

Check that they are set properly before plugging the power

cord into the household wall socket. If the voltage is not

properly set or if you move to an area here the voltage

requirements differ, adjust the selector switches as fol-

lows.

1. Use a medium-sized screwdriver.

2. First, insert the screwdriver in the groove of the volt-

age selector at the left, and adjust so that the tip of the

groove points to the voltage value of your area.

3. Next, insert the screwdriver in the groove of the volt-

age selector at the right and adjust until the voltage is

the same as at the left.

————

TWO VOLTAGE SELECTORS

110V

———

120-127V

Medium-sized screwdriver

U.S. mode!

NTSC

Multi-voltage model

PAL/NTSC

WARNING: to prevent FIRE OR SHOCK HAZARD, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

RETURN function

This function returns the unit to its initial settings with

the tuner ready to receive a broadcast. This is helpful

during troubleshooting or when no sound is output.

For details, refer to page 25.

CHANNEL STEP SWITCH

(Multi-voltage model only)

The unit has been factory preset to the channel alloca-

tion value for the area in which it is to be sold. If this

value is set incorrectly, the tunes in frequency may be

wrong, or sound may be distorted, resulting in an inabil-

ity to reproduce reception signals at their proper sound

quality. For this reason, be sure to confirm that the val-

ues are set correctly before first using the unit.

(FM 100 kHz/AM 10 kHz) position:

Set to this position for areas with an FM reception step of

100 kHz and AM 10 kHz.

(FM 50 kHz/AM 9 kHz) position:

Set to this position, for areas with an FM reception step

of 50 kHz and AM 9 kHz.

NOTE:

When unsure about the channel allocation for your area,

consult your dealer for correct information.

9kHz

SOkHz

40kHz 100kHz

CHANNEL

STEP