Pioneer CLD-1720K Manual de instrucciones - Página 34
Navegue en línea o descargue pdf Manual de instrucciones para Reproductor de CD Pioneer CLD-1720K. Pioneer CLD-1720K 45 páginas. Cd cdv ld player
LD/CDV/CD
Manual Search
' TO SEARCH FOR A PARTICULAR PASSAGE
Manual Search — Search using fast forward or fast reverse
Press for fast-reverse
i
Press for fast-forward
operation.
Normally Clear Scanis performed. To performn Low Scanand
High Scan, press DISP on the remote control unit to display
the screen and then press the SCAN button. For about two
seconds after the button is pressed, Low Scan is performed,
after that, the unit enters High Scan.
Clear Scan mode : The image may not fluctuate in this
mode.
Low Scan mode : Scan speed becomes about x10 the
normal playback speed.
High Scan mode : Scan speed becomes about x30 the
normal playback speed.
@ With CDs or audio part of CDVs, Clear Scan mode cannot
be carried out.
@ With video part of CDV, High Scan mode cannot be
carried out.
EXTRA PLAYBACK
operation.
| sound is selected with
dat low volume level. In
®
|n Clear Scan mode, when digi
digital audio discs, soundis h
karaoke mode, sound is muted
@ With CDs or audio part of CDVs, sound is heard at low
volume level while scanning
e@ Others: Sound is muted.
Note on CAV:
While scanning, noise may occur on the screen,
This is not
a malfunction.
Notes on CLV:
e While scanning, the color of the image may fade out or
the image sometimes fluctuates.
e@ The scan speed is different between
inner tracks and
outer tracks.
LD(CAV)
Still frame and Frame-by-Frame advance function
x
STEP
<u
on
Press either of these buttons.
During playback if STEP on the remote
conirol unit is
pressed, the picture will be frozen,
At thi
int, the disc
can
be played one frame ata time in either
the forward or reverse
direction by pressing one of these buttons.
The sound is
muted during still frame or frame advance
operation
To return to normal playback operation, press bm
NOTES:
®
if a disc containing special signals called "picture stop codes"
is played, the picture is automatically frozen whenever the unit
encounters a frame where a picture stop code is encoded. To
move from that position, press >.
@
/f a microphone is connected to the MIC jack, the beginning of
the chapter is designated by the picture stop code, the picture
will not be frozen even when the chapter is reached with frame
advance function.
34
<VRB1089>