Pioneer CLD-1720K Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Reproductor de CD Pioneer CLD-1720K. Pioneer CLD-1720K 45 páginas. Cd cdv ld player

PRECAUTIONS
if it becomes necessary to transport or ship this unit
in the future,
be sure to first remove
the disc (if
loaded), and retract the disc table to its closed position.
Then turn the power off, and, after the "OFF" display
goes out on the display, disconnect the power cord.
INSTALLING THE PLAYER
®
Place the player on a stable platform next to the television
and stereo system to be used with the player.
@ VWhen
using the player with a stereo
system,
your
speakers should be placed away from your television (or
TV monitor).
@
Do not place heavy objects such as a television or TV
monitor on top of the player.
@
Do not place the player on top of your TV set or TV
monitor. Also, keep the player away from devices such
as cassette decks which are sensitive to magnetic fields.
When FM or AM stations are being received, signal noise
may be generated if the player is turned on. Turn off the
player when not in use. Also, if there is signal noise when
receiving radio stations with an indoor antenna, adjust the
position or direction of the antenna.
INSTALL
THE
PLAYER
IN A WELL
VENTILATED
PLACE AWAY FROM HEAT
AND HUMIDITY
Do not install the player in a location subject to direct
sunlight, or near a stove or radiator etc. This could adversely
affect the cabinet
and internal components.
Also avoid
installing the player in a humid or dusty location. This could
result in a malfunction or accident. Do not install near a
cookstove where the player could be affected by smoke,
steam, or heat.
AVOID SOURCES OF HEAT
Do not put the player on sources
of heat, such as an
amplifier. When installing with audio cornponents on a rack,
avoid components that generate heat, by placing the player
below such components where there is adequate ventilation
and not much dust. Avoid placing the player on surfaces
such as shaggy carpets, beds, and sofas which may block
ventilation under the player and cause damage.
CAUTIONS FOR AUTOMATIC LOADING
OPERATIONS
Since this player has an automatic
use the button on the play
unit for opening and closing of
damage,
be careful not to ar
moving disc table.
loading construction,
the remote
control
disc table. To avoid
any jorce to the
CAUTION
Since the builtin disc-drive motor continues rotating even
when the player is in pause mode, do not leave the player in
pause mode for an extended period of time. This will reduce
the motor's service life.
In the case of the Karaoke player which automatically enters
pause mode after a track is played, be sure to press the STOP
button when the player is not to be used for an extended
period of time.
STRIPE
PATTERNS
APPEARING
ON
A
TV
PROGRAM
Stripe patterns may appear during a TY program if the
player
unit is turned on, depending on the quality of reception of
the TV station.
This is
a malfunction of the television
nor the player.
lf strir
while
watching the TV, or
when waiching the 1
player off
CONDENSATION
Moisture will form in the operating section of the player
if the player is brought from cool surroundings into a
warm
room
or if the temperature
of the room
rises
suddenly. When this happens, player's performance wiil
be impaired.
To prevent
this,
let the
player
stand
in its new
surroundings for about an hour before switching it on,
or make sure that the room temperature rises gradually.
The
same,
symptoms of conde:
summer,
if the player is expos
conditioner,
In such
cases
tion may be ¢
to the breeze from an air
hange the location of the player.
POWER-CORD CAUTION
tric shock. Do nat place the
rd, or pinch the
cord.
your near
replacement.
| CLEANING CARE
Use a soft. dry cloth for clean
cloth in a solution of household
detergent diluted using 1 par
detergent to five ar si
ing well first an
Use a dry cloth to wipe it dry.
Do not use any volatile a
such as benzine or paint thinner, as they may dame
Fer stubborn dirt, soak the
Abnormal functioning of this unit may be caused by
lightning, static electricity, or other external inter-
ference. To restore normai operation, turn the power
off and then on again, or unplug the AC power cord
and then plug it in again.
t i bo
5
<VRB1089>