Pioneer CT-M66R Manual de instrucciones

Navegue en línea o descargue pdf Manual de instrucciones para Reproductor de CD Pioneer CT-M66R. Pioneer CT-M66R 12 páginas. Multi-cassette changer

Imprimir página

MULTI-CASSETTE

CHANGER

Operating

Instructions

[ees

cee

cS)

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will

know how to operate your unit properly. After you have finished

reading these instructions, keep the manual in a safe place for

future reference.

In some countries or regions, the shape of the power plug and

power outlet may sometimes differ from that shown in the draw-

ings. However, the method of connecting and operating the unit

is the same.

WARNING: TO PREVENT | FIRE OR SHOCK

HAZARD,

NOT

EXPOSE

THIS APPLI-

ANCE TO RAIN OR MOISTURE.

IMPORTANT

NOTICE

[For U.S. and Canadian models}

The serial number for this equipment is located on the rear panel

Please write your serial number on your enclosed warranty card

and keep it ina secure area. This is for your security

[For Canadian model]

This digital apparatus does not exceed the Class B limits for radio

noise emissions from digital apparatus set out in the Radio inter-

ference Regulations of the Canadian Department of Communica-

tions.

[Pour le modéle Canadien]

L'interférence radioélectrique générée par cet appareil numérique

de type B ne dépasse pas les limites enoncées dans le Reglement

sur les perturbations radioélectriques, section appareil numérique,

du Ministére des Communications.

[For Canadian model}

CAUTION:

TO PREVENT

ELECTRIC

SHOCK

DO NOT

USE

THIS

(POLARIZED)

PLUG

WITH

EXTENSION

CORD,

RECEPTACLE

OR OTHER

OUTLET

UNLESS

THE

BLADES CAN BE FULLY INSERTED TO PREVENT BLADE

EXPOSURE.

ATTENTION:

POUR

PREVENIR

LES

CHOCS

ELEC-

TRIQUES

NE PAS

UTILISER

CETTE

FICHE

POLARISEE

AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU

UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES

PEUVENT

ETRE INSEREES A FOND SANS EN LAISSER

AUCUNE PARTIE A DECOUVERT.

LINE VOLTAGE

SELECTOR

SWITCH

Only multi-voltage models are provided with this

switch.

U.S., Canadian,

European,

U.K., and Australian

models are not provided with this switch.

Mains

voltages

in Saudi

Arabia are 127V and

220V only. Never use this model with 110V set-

ting in Saudi Arabia.

The line voltage selector switch is on the rear panel. Before your

model is shipped from the factory, this switch is set to the power

requirements

of the destination. Check that it is set properly

before plugging the power cord into the AC wall socket. If the

voltage is not properly set or if you move to an area where the

voltage requirements differ, adjust the selector switch as follows.

1. Disconnect the power cord.

2. Use a medium-size screwdriver.

3. Insert the screwdriver into the groove on the voltage selector,

and adjust so that the tip of the arrow points to the voltage

value of your area.

Set the voltage selector

for the voltage in your area.

Medium-size screwdriver

"This product

complies

with the Radio Interference

requir

ments of the EC (European Community} Directive 87/308/EEC."

@ PIONEER'

The Art of Entertainment