Pioneer PD-M703 Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Reproductor de CD Pioneer PD-M703. Pioneer PD-M703 20 páginas. Multi-play compact disc player

Imprimir página

CONNECTIONS

Make sure that all of the components

are turned off

before making connections.

Stereo amplifier

OOO)

White

Red

Control cable

CD player

L / Output cable

White

Red

Power cord

Cassette deck

CODECK

SYNCHRO

Lf <I

CD-DECK

SYNCHRO cable

Making connections

1. Connect the OUTPUT jacks of this unit to the input

jacks (CD or AUX) of the amplifier. Make sure that

the white plugs are connected to the left (L} jacks

and the red plugs to the right (R) jacks.

Be sure not to connect this unit to the amplifiers

PHONO jacks, as sound will be distorted and normal

playback will not be possible.

2. Connect the power cord to a household AC wall

outlet or an AC outlet on your amplifier.

Make sure plugs are inserted fully into the jacks and wall

outlet.

CD-Deck synchro function

lf you have a Pioneer cassette deck provided with the CD-Deck

synchro function, connect the CD-DECK SYNCHRO jacks of the

CD player and cassette deck. With this function, synchro

recording can be carried out between player and deck.

For details on connections and operation, refer to the

operating instructions supplied with the cassette deck.

The CD-DECK SYNCHRO

cable is not supplied with the CD

player.

NOTE:

!n order to enable the CD-DECK SYNCHRO recording function,

the normal output cable must be connected to the stereo

amplifier.

System remote control with a PIONEER stereo

amplifier that has the i] mark

{Applicable models:

PD-M503 [all models],

PD-M603 [U.S. and Canadian models only],

PD-M703 [U.S. and Canadian models only}.

When a PIONEER stereo amplifier bearing the J mark is used,

connect the CONTROL

IN jack on the rear panel of the CD

player to the CONTROL OUT jack of the amplifier. This will

enabie the CD player to be controlled using the remote control

unit supplied with the stereo amplifier. If you do not plan to

use this feature, it is not necessary to connect CONTROL

IN/OUT jacks.

The control cable is supplied with the CD player.

The remote control unit supplied with the amplifier can be

used to contro! Play, Stop, Pause, Track/Disc Search and

Disc Change operations.

For instructions regarding connections and operation, refer

to the operating instruction manual provided with your

stereo amplifier.

NOTE:

When a control cable is connected to the player's CONTROL

IN jack, direct control of the player with the remote control

unit is not possible. Operate the player with the remote

control unit by aiming it at the amplifier. (Except for PD-

M503)

Be sure to connect both of the control cable's plugs secure-

ly to the CONTROL IN and CONTROL OUT terminals, Do

not connect only one end of the cable,

Be sure to turn off the power of the amplifier before

connecting the power cord and output cable.

Connecting the power cord

Connect the power cord to a household AC wall outlet or an

AC outlet on your amplifier. (See the section "AC power cord

connection and functions" on page 12.)

Make sure plugs are inserted fully into the jacks and wall

outlet.

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug by

tugging the cord and never touch the power cord when your

hands are wet as this could cause a short circuit or electric

shock. Do not place the unit, a piece of furniture, etc., on the

power cord, or pinch the cord. Never make a knot in the cord

or tie it with other cords. The power cords should be routed

such that they are not likely to be stepped on. A damaged

power cord can cause fire or give you an electrical shock.

Check the power cord once in a while. When

you find it

damaged, ask your nearest PIONEER authorized service center

or your dealer for a replacement.