Pioneer PDR-509 Manual de instrucciones - Página 34
Navegue en línea o descargue pdf Manual de instrucciones para Reproductor de CD Pioneer PDR-509. Pioneer PDR-509 40 páginas. Compact disc recorder
También para Pioneer PDR-509: Esquemas de servicio (23 páginas), Manual de servicio (48 páginas), Manual de servicio (23 páginas), Manual de servicio (14 páginas)
Imprimir página
Additional Recording Features
Erasing a CD–RW Disc
Although more expensive than
Various erase options are available depending on whether the disc has been finalized. If you want to perform an erase
operation on a finalized disc that is only available for non-finalized discs, you first have to do a
finalized disc to a non-finalized state.
A third, special option, erases (re-initializes) the whole disc. This process takes quite a long time to complete and should be
used for recovering damaged discs, not for erasing tracks from a healthy disc.
CAUTION!
Never switch off the power during
do accidently disconnect the power, the recorder will try and re-initialize the disc once power is restored. Unfortu-
nately, it may not be possible to complete the process successfully, and the disc may be damaged as a result.
If the message
the erase command again.
Be sure to remove the disc from the recorder before switching off the power, otherwise the erase operation will not
be completed.
◊ÛB - .?/
INPUT
SELECTOR
3
REPEAT
Function indicator lights
when erasing
COMPACT DISC DIGITAL RECORDER
34
–
discs, the great advantage of
CD
R
–
CD
RW
appears any time during any erase process, hit eject, take out the disc, clean it, then try
CHECK DISC
1
When a non-finalized disc is loaded:
1
MONITOR
TIME
2
2
DIGITAL
ANALOG
REC LEVEL
REC LEVEL
3
–
is that the discs can be erased and reused.
CD
RW
erasing - your disc may become unusable. If there's a power failure or you
Press ERASE.
The display shows
then
ERASE
blinks to indicate erase standby mode.
Press 7 (stop) to cancel last track erase here.
Use the jog dial or press 4 and ¢ on the re-
mote control to change the erase option.
Switch between:
– erase just the last track
?
LAST
– erase all tracks
?
ALL
02–[
] – erase track 2 and all subsequent tracks
LAST
03–[
] – erase track 3 and all subsequent tracks
LAST
Keep turning the jog dial or press 4 and ¢ on the remote control to
change the number of tracks to erase.
Press 8 (pause) to start erasing.
The process takes just a few seconds. During this time, the function
indicator lights.
Î
FADER
FINALIZE
REC
DIGITAL
AUTO/
TRACK NO.
ERASE
SYNCHRO
MANUAL
WRITE
1
7
8
3
TIME
3
1
¡
4
¢
2
SKIP ID
INPUT
SKIP
SELECTOR
PLAY
SET
CLEAR
1
2
3
4
5
6
7
8
erase. This returns a
TOC
and the recorder function indicator
?
LAST