Pioneer X-CM56D Manual de instrucciones - Página 35

Navegue en línea o descargue pdf Manual de instrucciones para Reproductor de CD Pioneer X-CM56D. Pioneer X-CM56D 38 páginas. Cd receiver system

Imprimir página

Additional information

• Only the discs that have been finalized can be

played.

• Discs recorded in packet write mode (UDF format) are

not compatible with this unit.

• Corporation and product names mentioned herein are

trademarks or registered trademarks of the respective

corporations.

• Only discs recorded in ISO9660 Level 1, Level 2 and

Joliet can be played.

• Files protected by DRM (Digital Rights Management)

cannot be played.

MP3:

MP3 is a form of compression. It is an acronym which stands

for MPEG Audio Layer 3. MP3 is a type of audio code which

is processed by significant compression from the original

audio source with very little loss in sound quality.

• This system supports MPEG-1/2 Audio Layer 3

(Sampling rates: 32 kHz to 48 kHz; Bit rates: 8 kbps to

320 kbps).

• During VBR file playback, time counter in the display

may differ from its actual playback time.

• The folder and file order information which is recorded

on the media depends on the writing software. There

maybe possibilities that this unit will playback the files

not according to our expected playback order.

• From a media with MP3 files up to 255 folders and 999

files (including non playable files) can be read.

Note

• This unit does not support multisession discs or

multiborder recording.

• Multisession/multiborder recording is a method in which

data is recorded on a single disc in two or more

sessions/borders. A "session" or "border" is one

recording unit, consisting of a complete set of data from

lead-in to lead-out.

Regarding copy protected CDs

This unit is designed to conform to the specifications of the

audio CD format. This unit does not support the playback or

function of discs that do not conform to these specifications.

Supported audio file formats

This unit does not support lossless encoding.

Cautions on use

When moving this unit

When moving this unit, be sure to first check that there is no

disc loaded and disconnect the USB storage device. Then

press Í, wait for "STAND BY" disappears on main display to

turn off, then unplug the power cord. Damage may occur if

the unit is transported or moved with a disc inserted, or when

another device is connected to the USB terminal, or AUDIO

IN mini-plug jack.

Place of installation

• Choose a stable place near the TV or stereo system

being used with this unit.

• Do not place this unit on top of a TV or color monitor.

Also install it away from cassette decks and other

devices easily affected by magnetic forces.

Avoid the following locations:

• Places exposed to direct sunlight

• Humid or poorly ventilated places

• Extremely hot places

• Places exposed to vibrations

• Places in which there is much dust or cigarette smoke

• Places exposed to soot, steam or heat (kitchens, etc.)

Do not place objects on this unit

Do not place any objects on top of this unit.

Do not obstruct the ventilation holes.

Do not use this unit on shaggy rugs, beds, sofas, etc., or

wrapped in cloth, etc. Doing so will prevent the heat from

dispersing, leading to damage.

Do not expose to heat.

Do not place this unit on top of an amplifier or other

component that generates heat. When rack mounting it, to

avoid the heat given off by the amplifier or other audio

component, place it on a shelf below the amplifier.

• Turn off the unit's power when not using it.

• Depending on signal conditions, striped patterns may

appear on a TV screen and noise may enter the sound

of radio broadcasts when the unit's power is on. If this

happens, turn the unit's power off.

About condensation

If this unit is moved suddenly from a cold place into a warm

room (in winter, for example) or if the temperature in the

room in which this unit is installed rises suddenly due to

heater operation, etc., water droplets (condensation) may

form inside (on operating parts and the lens). When

condensation is present, this unit will not operate properly

and playback is not possible. Let this unit stand at room

temperature for 1 or 2 hours with the power turned on (the

time depends on the extent of condensation). The water

droplets will dissipate and playback will become possible.

Condensation can also occur in the summer if this unit is

directly exposed to the air flow from an air-conditioner. If this

happens, move this unit to a different place.