Pioneer DV-270-S Manual de instrucciones - Página 36
Navegue en línea o descargue pdf Manual de instrucciones para Reproductor de DVD Pioneer DV-270-S. Pioneer DV-270-S 41 páginas. Pioneer corporation operating instructions dvd player dv-270-s, dv-373-s, dv-373-k
Imprimir página
08
Additional information
Note
• Using the 16:9 (Wide) setting with a
standard 4:3 TV, or either of the 4:3 settings
with a widescreen TV, will result in a
distorted picture.
Setting the TV system
(Except DV-270-s and DV-373-s Taiwanese
model)
The default setting of this player is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO. If you experience picture distor-
tion with some discs, set the TV system to
match your country or region's system. Doing
this, however, may restrict the kinds of disc you
can watch. The table below shows what kinds
of disc are compatible with each setting
(AUTO, PAL and NTSC).
1
If the player is on, press
ON to switch it to standby.
2
Using the front panel controls, hold
down
then press
switch the TV system.
The TV system changes as follows:
• AUTO
NTSC
• NTSC
PAL
• PAL
AUTO
Note
• You have to switch the player into standby
(press
STANDBY/ON) before each
change.
36
En
STANDBY/
STANDBY/ON to
Disc
Player setting
Type
Format
NTSC
DVD/
NTSC
NTSC
Super
PAL
NTSC
VCD
Video CD NTSC
NTSC
PAL
NTSC
CD
—
NTSC
no disc
Resetting the player
Use this procedure to reset all the player's
settings to the factory default.
1
Switch the player into standby.
2
Using the front panel buttons,
hold down the
(stop) button and press
STANDBY/ON to switch the player back
on.
All the player's settings are now reset.
Power reset
Use this procedure to switch the power off if
the player is unresponsive to any control from
the front panel or remote.
1
Press and hold the front panel
STANDBY/ON for 10 seconds.
When the power is completely off, you cannot
use the remote to switch it back on again. Use
STANDBY/ON button.
the front panel
PAL
AUTO
PAL
NTSC
PAL
PAL
PAL
NTSC
PAL
PAL
PAL
NTSC or
PAL