Pioneer PRV-LX1 Boletín de información del producto - Página 4

Navegue en línea o descargue pdf Boletín de información del producto para Reproductor de DVD Pioneer PRV-LX1. Pioneer PRV-LX1 6 páginas. Dvd-video recorder
También para Pioneer PRV-LX1: Boletín de información del producto (5 páginas), Inicio rápido (5 páginas), Manual complementario (1 páginas), Manual de protocolo de comandos (20 páginas), Protocol Manual (14 páginas), Editar lista de decisiones (6 páginas), Manual de software (24 páginas), Mantenimiento (5 páginas), Manual de instrucciones (38 páginas), Manual de actualización (2 páginas), Actualización del sistema (10 páginas), Actualización del sistema (10 páginas), Manual de formación (38 páginas), Manual (38 páginas)

DHCP or Manual Option

There are two network options to choose from, DHCP and Manual. DHCP automatically seeks an

available IP address on your network and assigns it to the PRV-LX1. Manual mode requires that the

user type in the IP address, Subnet Mask, and Gateway parameters, which can be obtained from

your network administrator.

Note: If DHCP is selected but no DHCP server exists, the PRV-LX1 takes additional time to start up

after the power is turned ON. If this option is not being used, set DHCP to OFF.

Follow the directions below to set the network connection.

Select DHCP/Manual from the Network submenu.

Select DHCP to activate this option.

Verify that an orange box ( ) appears next to DHCP.

Write down the automatically assigned IP Address for use in the next section.

The IP address may not auto-refresh. If the IP address assigned to the PRV-LX1

fails to appear, follow the directions below to refresh the IP address:

Note: If the IP address still fails to appear, verify that the network cables are connected securely and

that there is an active Network connection. Repeat steps 1-3 to try again.

Connect via FTP to Export the VOB File

The following steps are to be completed from a computer with an active Network connection. Verify

that both the PC and the PRV-LX1 are connected to the Network via a hub or a crossover cable.

Launch Internet Explorer (must be version 6.0 or higher).

Pioneer Electronics (USA) Inc.

Home & Business Group of America

1. Select the Back button located at the bottom of the menu.

2. Select System under the SETUP section.

3. Select Network (far left column) to access the Network submenu.

(310) 952-2000

(800) 872-4159

PIB # 190109

Released: July 21, 2006

Page 4 of 6