Pioneer S-DV151 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Sistema de altavoces Pioneer S-DV151. Pioneer S-DV151 48 páginas. Dvd/cd receiver speaker system
También para Pioneer S-DV151: Manual de servicio (7 páginas)

Imprimir página

Getting started

Chapter 2

Getting started

Home theater sound setup

Place your speakers as shown below for

optimal surround sound (see the Speaker

Setup Guide for more placement tips).

• Standard surround 5-spot setup – This is

a standard multichannel surround sound

speaker setup for optimal 5.1 channel

home theater sound.

Center

Front left

Listening position

Surround

left

XV-DV353/151 only: Depending on the size and

characteristics of your room, you can choose

to use the following setup option:

• Front surround 3-spot setup – This setup

is ideal when rear surround speaker

placement isn't possible or you want to

avoid running long speaker cables in your

listening area. Use this setup together with

the Front Surround modes to take

advantage of wall and ceiling reflections

for a very realistic surround effect.

XV-DV353 model speaker setup:

Front left

Center

Surround

left

Listening position

Note

1 When using this setup, make sure the front surround mode is switched on (page 14) before selecting any surround mode.

2 • This is only available when DVD/CD is selected and playback is stopped. Also make sure headphones are unplugged.

• To adjust the overall balance while listening to any sound source you want, press SETUP, use

press ENTER. Use

to move channel to channel, and

3 Since the subwoofer produces ultra-low frequencies its sound may seem quieter than it actually is.

Front right

Subwoofer

Surround

right

Front right

Subwoofer

Surround

right

XV-DV151 model speaker setup:

Front

left

Surround

left

Listening position

After placing your speakers, complete Setting

the channel levels below then refer to Speakers

settings on page 28 to complete your surround

sound setup.

Setting the channel levels

Set the relative channel levels from your main

listening position.

Press TEST TONE .

The test tone is output in the following order

(from the speakers active in the current

listening mode):

• L – Front left speaker

• C – Center speaker

• R – Front right speaker

• SR – Right surround speaker

• SL – Left surround speaker

• SW – Subwoofer

Use the VOLUME +/– button to adjust

the volume to an appropriate level.

to adjust the channel levels. Press ENTER when you're finished.

Center

Front

right

Subwoofer

Surround

right

to select CH LEVEL then