Pioneer S-DV353 XTW/WL5 Manual de servicio
Navegue en línea o descargue pdf Manual de servicio para Sistema de altavoces Pioneer S-DV353 XTW/WL5. Pioneer S-DV353 XTW/WL5 6 páginas.
Imprimir página
SPEAKER SYSTEM
S-DV353
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-
yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to
properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the
warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk
trying to do so and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to
cause cancer, birth defects or other reproductive harm.
1. FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
Front / Surround Speaker
The grille is attached to the cabinet by 6 external screws. To
detach it, unfasten those screws.
The speaker unit, together with the grille, is attached to the
cabinet by 4 external screws. To detach it, first unfasten those
screws. Next remove the cabinet. Then remove the cable. When
attaching it, face its terminal downward.
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
Front
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
Subwoofer
Surround
Center
XTW/WL5
Health & Safety Code Section 25249.6 – Proposition 65
Center Speaker
The grille assy is attached to the cabinet by 8 external screws.
To detach it, unfasten those screws.
The speaker unit, together with the grille assy, is attached to the
cabinet by 4 external screws. To detach it, first remove the
grille assy. Next remove the cabinet. Then remove the cable.
When attaching it, face its terminal toward the input terminal.
Subwoofer
The speaker unit is attached to the back board by 4 external
screws. To detach it, unfasten those screws. When attaching it,
face its terminal downward.
The cosmetic baffle assy is attached to the baffle board by
press-fitting. To detach it, pry it open by inserting a flat blade
screwdriver into lower slot.
T – ZZS MAR. 2006 Printed in Japan
ORDER NO.
RRV3375